User's Manual

III. Utilization
In normal case, Twitoo has to be plugged in continuously.
If needed, to link a new medical Bluetooth peripheral, please see the peripheral specific manual. In
some cases, the multifunctional button could be used.
To clean the Twitoo, you can use damp cloth with special attention on the multifunctional button.
IV. Maintenance
1. Battery
Twitoo contains a backup battery that allows it to continue operating in case of mains failure for
about 1 hour. The battery automatically recharges when Twitoo is plugged to the mains again. It is
possible that the battery is not fully charged when you received your Twitoo. You have to let it
plugged at least 12 hours so that it is completely operational.
2. Positioning in the home
Twitoo use wireless communication system, so that you should avoid proximity with TV,
microwave-oven, cellular phones, or other devices that emit strong electromagnetic fields. The
nature and thickness of the walls can also disrupt the transmission. We advise you to place your
Twitoo in a living room on a visible furniture.
3. Indicators:
Twitoo has 4 LEDs of different colors:
− Green: power status
− Blue: Bluetooth status
− Orange: GPRS status
− White: Button status
Intensity of these indicators can be set remotely by a technician.
In case of mains power failure, the green light will blink.
4. Flashes
There are 4 types of flashes on the indicators of Twitoo: On, Off, Slow flash, Quick flash. Thes
flashes could help the diagnostic of remote assistance.
5. Multifunctional button
When the multifunctional button indicator is On, that shows the good status of the Twitoo.
If this indicator is Off, that indicates a problem. To solve this, try the following actions:
− Check that the power adaptor is correctly plugged in and that there is no mains failure.
− Unplug, then plug in again the Twitoo and wait the end of the initialization sequence.
− If you do not see amelioration, please contact technical service.