Product Instruction

ManualsBrandsXiamen Raffle Systems Smart Technology ManualsElectronicsEmbedded wireless charger

Product Instruction

For your safety, please read this manual carefully before using this product.

First: In order to protect you from injury and property damage, we clearly

explain what you should follow:

A) Warning! It may cause serious injuries or even casualties. People should consult the doctor

before using implantable medical devices (such as using pacemaker). Please install your

equipment 50 centimeters away from this product because it may influence the operation of

implantable medical device.

B) Attention! It may cause fever, fire and electric shock.

1) Do not put the product in water or other liquids, avoid water into the product;

2) Do not touch the AC adapter with wet hands to ensure the safety and integrity of the adapter

3) Do not let dust accumulate on this product and adapter

Summary of content (7 pages)

PAGE 1
Product Instruction For your safety, please read this manual carefully before using this product. First: In order to protect you from injury and property damage, we clearly explain what you should follow: A) Warning! It may cause serious injuries or even casualties. People should consult the doctor before using implantable medical devices (such as using pacemaker). Please install your equipment 50 centimeters away from this product because it may influence the operation of implantable medical device.
PAGE 2
4) Do not use this product under the temperature of -10℃——40℃; 5) Do not use it in the places of direct sunlight or high temperature; 6) Do not use the product where is slippery to avoid break down.
PAGE 3
Second: Charging method of wireless charging Diagram for using and installing:
PAGE 4
1) Connect the product to an adapter that outputs DC9V or any device with an output voltage of DC9V, blue and green lights will alternately flicker when power is turned on; 2) If the wireless charging product detects that there is no equipment to be charged in the charging area, the product will be on standby. 3) Place the equipment (mobile phone) that needs to be charged in the charging area of the product, the green light is on; then the blue light will be on when it enters charging condition.
PAGE 5
Main function: Wireless charging launcher Product application: All wireless charging devices under QI standard Charging type: One-to-one charging in corresponding area Input voltage: DC 2A/9V Launch distance: 2-6mm Charging power: 10W(MAX) Conversion efficiency：＞70% Charging way: Induction mode Working frequency: 110—205KHz FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference.
PAGE 6
(2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules.
PAGE 7
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. • Consult the dealer or an experienced technician for help.