User's Manual

13
3.4.1 The operational method of FEED
printer status
Operation of FEED
Function
standby
press
Feed in a blank paper automatically
standby
Press(3 seconds)
Enter into the learn mode of cover
sheet
Power off
Hold （release after
power on)
Print out self test page
Open the cover
Press 10 seconds
Factory Reset
Continuous
printing
press
Print pause
Print pause
press
Resume Printing
3.42 Led indication of printer status
Led status
The representative of the printer status
Green light shine
Normal standby
Green light slow flashing
Printer working
Blue light shine
RAM Test Errors
Pink light shine
Printer head over heat
Red light shine
The above cover is not covered
Red light flashing
No paper detected
Yellow light shine always
Low input voltage
Yellow light flashing
Paper jam
White light shine always
Print pause
3.5 Printing Test
3.5.1 Print Self-test Page
When initially install printer or any problems happen to printer, you can make
a self-test page to check status of firmware version, printer parameter setting,
printing quality and related setting information of external equipments etc.
Once you confirm printer does not have any problems after self-testing,