User's Manual

17
printing the self-test page, and
PLS check the driver port
setting is the same as the
printer;
c. 3.42 reference manual printer
various states of LED indicator,
confirm whether the printer in
the standby state (green light
normally on);
Incorrect
positioning
a. No label locating
learning;
b. Seam mark detection
sensor components
position offset;
c. Selection mode
error;
a. Do label locating learning(take
reference of Point 3.6);
b. PLS open the cover to check
the seam mark detection
components position offset.
Black mark paper: The mark
detection components move
according to the black mark
position, so the detection
sensor can detect the black
mark. Label paper/continuous
paper: detection sensor should
be in the range of paper width;
c. PLS use the setting tool to
check the printer info, to
confirm the paper type is
consistent with the paper
loaded in the printer, it can be
changed by setting tool;
Poor print
quality
a. Incorrect paper
loading;
b. Improper setting of
a. Reloading paper(take reference
of Point 3.3 loading the media);
b. Use setting tool or software to