User's Manual

10
V. Power Switch, Keystroke and Indicator Light
5.1 Power Switch
Switch is for turning on/off the power supply of printer which
is located on the left. When pressing “-”, the printer turns on and
when pressing “O”, it turns off.
Notice: Do not turn on the switch unless the user connects the
power supply.
5.2 Keystroke and Indicator Light
Keystroke and indicator board is shown as below：
FEED Key：
In the standby status, the printer would be continuous feed
when pressing the feed key. Of course, the key is inefficacy when
the printer is working.
Press the feed key and switch on the power supply while the
key is still under pressing, then the user could do the self-checking of printer.
POWER Key（Green）：
Light appears continuously when connected to the power supply.
ERROR Key（Red）：
Light appears under following condition:
Paperless, paper jam, print head overheat, print head error or other situations.
PAPER Key（Red）： Light appears when paperless.
5.3 Setting Printer Mode
80 printer is initially setup with default value. However, the default printer mode
can be reconfigured to satisfy customer’s needs through the DIP switch, which is
located at the bottom of the printer.
The function of DIP switch setting as follows：
Switch
Function
（on）
（off）
1
cutter
No cutter
With cutter
2
Buzzing prompt
Open buzzing prompt
Close buzzing prompt