User's Manual

4.3SelfTesting
On self testing page including print item No., interface and DPI etc.
Selftest
FirmwareVersion:GD20x_V1.002016-10-10
Model:.....................RPP320
Interface:................USB
&wifi
&BlueTooth
PrintMethod:..........DirectThermal
PrintDensity:..........9
PrintSpeed:.............4
Font:.........................24x24GB18030
MediaType:.............Label
InstructionSet:.......TSC
Dpi:...........................203
Size:..........................0mm，0mm
Reference:...............0mm，0mm
Shift:.........................0mm
Offset:.......................0mm
[POWER&DEGREE]
VOLTAGE:8.3DEGREE:30
[BlueToothConfigure]
EDRNAME:....
BLENAME:....
EDRPIN:........0000
BLEPIN:.........000000
EDRADD:.......00-00-15-01-B0-4C
BLEADD:........00-01-15-01-B0-4C
[WIFIConfigure]
WIFISSID:.........12345678
EthernetID:.......41-38-30-31-35-37
DHCP:.................Disable
Ipaddress:.........192.168.1.87
Port:....................9100
NetMask:............255.255.255.0
PorductParameters
PrintSizeParameter
Voltage/Temperature
BluetoothParameters
WIFIParameters
Bluetooth/WIFIinformationcansetup
bysettingtool,thedetaisplscheck
<Settingtoolmanual>.
12