Installation Instructions

Table2 3 - way Function table
Function
smart switch
Operation Way
smart
switch
Operation
3-way
Switch
or Toggle
Switch
Operation
APP
Operation
Distribution
network mode
Long press ON or OFF
for 5 seconds
√ × ×
Long press the reset
switch for 5 seconds
ON
Press the ON button
once
√ √ √
OFF
Press the OFF button
once
√ √ √
Time switch
on/off
NOT × × √
Shared device NOT × × √
group control NOT × × √
Troubleshooting
Problems Possible Cause Solution
Lights flickering
Lamp has a bad
connection.
Reconnect and fix the
wires.
Lamps can’t be turn
on
Circuit breaker has
tripped.
Turn power on
Fuse burn out Change fuse
Lamp burned out Change lamp
Lamp neutral
connection is not wired
Reconnect the lamp
neutral
Lights out of control
or unable to connect
to the network
abnormal
Pull out the power
cut-off switch and
disconnect the power
supply; Insert the power
cut-off switch and turn
on the power again;
Distribution network
 Network mode: when the light is on, Long press ON or OFF for
3 seconds. After the status indicator blinks quickly, the phone
can be connected to the smart switch. (if it is not connected, exit
the network mode after 3 minutes).
 Supports Amazon Echo Plus and Philips Hue control.
Mobile app operation
Step 1 Download the ‘Smart Life’ App
 Use your mobile device to scan the QR code below or search
for "Smart Life" in the App Store or Google play to download
and install the app.
Step 2 Register an account and Login
 Open the Smart Life app,click Register to create an account and
login.
Step 3 Add the ZigBee gateway
 Click on the top right , click Add Device;
 Click Gateway Control and then click
,to enter the device
connection interface.
 Make sure the App control indicator LED1 is blinking, click
Confirm the indicator is blinking…,click 。

Enter your home Wi-Fi password,click Next, and wait for the
connection.
4
 Network mode: when the light is on, Long press ON or OFF for
5 seconds. After the status indicator blinks quickly, the phone
can be connected to the smart switch. (if it is not connected, exit
the network mode after 3 minutes).
 Click ,Click Add subdevice,Click LED
already blink,and wait for connection.
Step 5 Use the phone App to control smart switch
 Click
,control the light on and off function of the smart
switch.
 Click ,to set the timer light on and off function of the
smart switch.
 Add timing and save.
 After the smart switch is connected, it can be shared with
multiple people, that is, one smart switch can be controlled by
multiple apps.
 Click the upper right corner to
,enter the device details
interface.
 Click Share Device,to enter the Device sharing interface and
add family members.
Step
Add the Smart Switch
My Home