Specifications

Dry Contact Sensor
6
7. Use of Device
7.1. Steps for usage
 Place the device within the coverage of the ZETA network
 Install the battery, and wait for the device to go online.
 After the device is online, the current device status is reported.
 According to the usage scenario, set the policy configuration such as
alarm enable status and alarm threshold.
 Daily maintenance and data viewing.
7.2. Support function
Detection function
When the user's strong magnetism moves through the stroke and falls into
the sensor detection area, the sensor triggers an alarm. At this time, the
indicator light starts to flash, and the alarm message is uploaded to the
cloud platform via wireless.
Software function
 Report version number
 Set the status reporting period
 Set alarm reporting period
 Set alarm enable and threshold
 Set detection cycle
Indicator function
 Flashing when alarming-50ms every 1s
8. Common faults and handling
 Ensure ZETA signal coverage

Ensure that the device is powered on, and the ZETA network device
management platform can observe that the ZETA module is on line
 Check the battery usage of the device. When the battery is low, replace
the battery in time.