Specifications

ZETA Dry Contact Sensor
6
7. Installation
There are three installation methods: Screw, 3M Adhesive and cable ties.
7.1. Screw
7.1.1.Auxiliary material
No.
Materials
Quantity
1
self tapping screw (M3*20)
2/device
2
#4 expanded plastic pipe
2
3
Percussion drill，#4 drill bit，hammer
1
4
slotted screwdriver, cross screwdriver
1
7.1.2.Installation instructions
 Open the device case
Use a slotted screwdriver to open the top cover from the bottom edge.
 Punching
Place the device in the mounting position, punch and insert the expanded
plastic pipe.
 Fixation
opening