User's Manual

Host jack: connect the external equipment, such as mouse, U disk
and OTG cable.
DC interface: connect with the power source to charge the tablet.
TF card slot: external TF card.
Basic operation
Power on/off
In power off status, press the power button for 5 seconds，
after the boot up image then the device will enter main interface.
In power on status, press the power button for 5 seconds,
then ”Would you like to shut down” message will pop up on the
screen, click “OK” to power off .
Connect the PC and transfer file
In power on status, use the USB cable to connect the device and
PC, then click the “Turn on the USB Storage”, then the device will
act as a removable disk, it can upload and download file or data,
click “Turn off USB storage” to quit the connection status.
Charging
A “Low battery” message will flash on the screen when the battery
power is insufficient. Please use the provided charger to connect
the power source and the tablet. It can only charge in off status.
The whole charging time needs about 5 hours.
Reset function
When the PC tablet is at fault, use the pen pincushion to insert into
the reset hole on the back of the tablet, and the tablet will force to
shutdown.
Factory reset
Settings---factory data reset---erase Nand storage---reset
tablet---erase everything.
Note : select “Erase Nand Storage” will clear all the data, like
pictures ,music and movie. If you don’t select “Erase Nand Storage”
it will only delete part of the date and the APK downloaded data,
can’t clear the pictures ,music and movies in Nand
Main interface introduction
Power on the device, after unlock the device it will enter the main
interface
Screen lock: drag the screen lock icon to the unlock direction.
After it will enter the main interface as below (note: the device has
many kinds of unlock methods, it can set in setting menu.)