Product Description

Xiaomi Communications Co., Ltd.
13 / 14
7 MSL level / Storage conditions
 MSL level: Level 3-less than or equal to 30℃/ 60% RH 168 hours workshop life.
 Storage conditions: The products should be handled carefully during transportation,
and they should not be squeezed against each other to avoid being impacted and
strongly vibrated. The storage environment should be kept dry and ventilated. The
ambient temperature should be between 5℃ and 35℃. It should not be stored with
items that can generate corrosive gases.
8 Delivery Checklist
 Complete packaging
 Evaluation tool (SPI / UART / JTAG interface)
 The software supports customer integration and performance test certification.
 Unit test / Qualification report
 Product specifications
 Complete and clear identification, such as production serial number, MAC, etc.
 Agency certification report
9 INTEGRATION INSTRUCTIONS
1. This module has been tested and found to comply with the FCC Part15.247 for Modular Approval.
2. This Modular Approval is limited to OEM installation for mobile and fixed applications only.
The antenna installation and operating configurations of this transmitter, including any
applicable source-based time- averaging duty factor, antenna gain and cable loss must satisfy
MPE categorical Exclusion Requirements of 2.1091. This modular should be installed and operated
with minimum distance 20 cm between the radiator& your body.
3.
The PIFA antenna has been approved for the modular. The maximum antenna gain is 3.01dBi. For
situations where the host manufacturer is responsible for an external connector, the
integration instructions shall inform the installer that a unique antenna connector must be
used on the Part 15 authorized transmitters used in the host product.
4.. When the module is installed in the host device, the FCC ID label must be visible through
window on the final device or it must be visible when an access panel, door or cover is easily
removed. If not, a second label must be placed on the outside of the final device that contains
the following text: ―Contains FCC ID: 2AFZZMHCWB4P-IB.
5.. The Xiaomi Communications Co., Ltd.uses various test mode programs for test set up whi
operate separate from production firmware. Host integrators should contact SXiaomi
Communications Co., Ltd.for assistance with test modes needed for module/host compliance test
requirements.
6.. The SXiaomi Communications Co., Ltd. modular transmitter is only FCC authorized for the F
Part15.247 listed on the grant, and that the host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the modular
transmitter grant of certification. If the grantee markets their product as being Part 15
Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the
grantee shall provide a notice stating that the final host product still requires Part 15
Subpart B compliance testing with the modular transmitter installed.