Smart Air Purifier 4 Lite User Manual
WARNING · When the power adapter is damaged, it must be replaced with a genuine power adapter purchased from the manufacturer or after-sales service department. · This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. · Children shall not play with the appliance.
Precautions · Turn off and unplug the purifier before moving it. · The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly. · Maintain a distance of at least 20 cm between the air inlets and walls or other objects. · The purifier must be placed on firm and flat floor. · Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
Product Overview Read this manual carefully before use, and retain it for future reference. Note: Illustrations of the product, accessories, and user interface in this user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Display Instructions Mode Automatic: Automatically switch modes according to the indoor air quality. Sleep: Ultra-low noise for a comfortable sleeping environment. Manual: Set and save the coverage area in the app to adjust the purifying efficiency. Wi-Fi Indicator PM2.5 Value Temperature Humidity Air Quality Indicator The indicator will display green, orange or red according to the PM2.5 value.
Installation Placing the purifier Connecting to an electrical outlet For optimal performance, make sure the distances between purifier's air inlets and other objects such as walls meet the requirements as suggested below. Connect the power adapter to the power port at the middle part of the purifier and then plug it into an electrical outlet. 20 cm or more or 20 cm 20 cm more or mo re Note: It is recommended to keep doors and windows closed for a better purifying effect when using the purifier.
How to Use Turning on/off Adjusting the display's brightness Press the power button to turn on/off the purifier. Press the display on/off button on the back of the purifier to cycle through its brightness levels: on, dim, and off. Switching mode Enabling/disabling the child lock function While the purifier is on, press the mode switch button to cycle through modes. The child lock function can only be enabled via the app. Once enabled, the screen will flash and display as shown in Figure A.
Resetting Wi-Fi Connecting with Mi Home/Xiaomi Home app When connecting the purifier to the app for the first time or unable to connect to it, press and hold the display on/off button on the back of the purifier for 7 seconds. The purifier will make a notification sound once the Wi-Fi is successfully reset. This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/ Xiaomi Home app. Scan the QR code to download and install the app.
Replacing the Filter Warning: Make sure the purifier is turned off and the power adapter is unplugged before replacing the filter. Note: To avoid injuries, do not put your fingers between the upper and lower compartments when replacing the filter. 1 Opening the filter compartment Press and hold the release buttons with both of your hands, and lift up the upper compartment of the purifier. 2 Removing the old filter Remove the old filter upwards.
Daily Care & Maintenance Warning: Make sure the purifier is turned off and the power adapter is unplugged before performing the following operations. Cleaning the filter compartment To ensure optimal ventilation and purification, use a vacuum cleaner to remove any dust from the air inlets and the filter compartment, or wipe these areas gently with a soft cloth. Note: To avoid damaging the purifier, do not rinse or spray the purifier directly with water, or wipe it with a soaking wet cloth.
Specifications Name: Xiaomi Smart Air Purifier 4 Lite Particle Purification Efficiency: High Model: AC-M17-SC Formaldehyde Purification Efficiency: High Item Dimensions: 240 × 240 × 533.5 mm Particle's Clean Air Delivery Rate (CADR Particle): 360 m³/h Net Weight: Approx. 4.8 kg Formaldehyde's Clean Air Delivery Rate (CADR Formaldehyde): 120 m³/h Effective Coverage: 25–43 m2 * Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.
Manufactured by: Beijing Smartmi Electronic Technology Co., Ltd. (a Mi Ecosystem company) Address: Room 201-203, Unit 6, Building A, No. 66, Zhufang Road, Qinghe, Haidian District, Beijing For further information, please go to www.mi.com For detailed e-manual, please go to www.mi.com/global/service/userguide Made in China Importer: Beryko s.r.o. Na Roudné 1162/76, 301 00 Plzeň www.beryko.
