User Manual

This version is for private use only and should not be distributed.
02
3. Make sure to position the base unit so that the arrow is pointing up. Secure the base unit
in place by tightening the screws into the plastic anchors.
4. Match the grooves on the boom of the camera unit with the raised area on the base
unit. Press down until the two surfaces are flush, then turn the camera unit in either
direction to lock it in position.
When mounting the security camera on a wall:
please note that the wall must be able to support at least triple the product's total
weight.
2. Insert the two plastic anchors into the holes on the wall.