User Manual

This version is for private use only and should not be distributed.
04
Installing a MicroSD Card
Make sure that the power to the security camera is already disconnected. Adjust the
camera lens upward until the MicroSD slot is revealed, then insert the MicroSD card
into the slot (the side with contact points must be facing down).
Note: Please turn off the security camera's power supply before inserting or removing
the MicroSD card. Please use a genuine MicroSD card manufactured by a qualified
supplier and make sure that thestorage capacity is 64 GB or less, with a reading/
writing speed of no less than U1/Class 10.
MicroSD
Quick Setup
Control your device and interact it with other smart home devices in Mi Home app.
Install Mi Home app
Scan the QR code or go to app store to
download and install Mi Home app.
Add a device
Open Mi Home app, tap "+" on the upper right, and then follow prompts to add your
device.
Note: The version of Mi Home app might have been updated, please follow the
instructions based on the current app version.
Restore Factory Seings
Press and hold the Reset buon to restore your device to factory seings.
Data stored on the MicroSD card is not erased.