User Manual

Disassembly
Adjust the position of the buckle according to the circumference of your wrist. If you need to remove the strap, refer to
the figures below. Make sure you pull the strap after attaching it to ensure the strap is installed securely.
Charging
1. Place the watch on the charging dock. Make sure the contact points both on the back of the watch and the
charging dock are making contact with each other.
2. Connect the charging dock to a standard adapter at an output voltage of 5 V and an output current of 0.5 A or
higher.
Notes:
If the watch is unable to turn on after it has not been used for a while, it needs to be charged for about 1 minute
before the charging icon is displayed.
Wipe the watch’s contact points clean before charging so as to avoid residual sweat or moisture.