User guide

12
SPEC Table NRP-HC1501
Model
NRP-HC1501
SPECIFICATION
Power 1500W
Dimension 200mm(L)x150mm(W)x86mm(H)
Switches ATX Logic on-off additional power rocker switch
PFC Active PFC (PF > 0.9)
Cooling System 140mm Fan, 2300RPM±10%
Noise 16 dBA at 1300RPM
P.G. Signal 100-500 ms
Efficiency Up to 87%
Hold-up Time 10 ms
INPUT
Input Voltage 230VAC
Input Frequency Range 47/63Hz
MTBF 120,000 hrs minimum (at 25℃)
Input Current 10A
Output
Max/Min Regulation *1 Ripple & Noise *2 Output
+12V1 20A/1.0A +3, -3% 240mV
750W+12V4 40A/1.0A +3, -3% 240mV
+3.3V 30A/0.5A +3, -3% 100mV
+12V2 20A/1.0A +3, -3% 240mV
750W+12V3 40A/1.0A +3, -3% 240mV
+5V 30A/0.5A +3, -3% 100mV
-12V 0.8A/0.0A +10, -10% 240mV 9.6W
+5Vsb 3.5A/0.0A +3%, -5% 100mV 17.5W
Total Power 1500W
Peak Power 1600W
1. +5Vsb operate at 3.5A max load base on PS-ON mode. If PS-OFF +5Vsb only operate at 3A max load.
2. Add 0.1μF capacitors across output terminal during ripple & noise test.
Environment
Operating Temp. 10℃ to 50℃
Storage Temp. -20℃ to 70℃
Operating Humidity 20% to 90%, non-condensing
Storage Humidity 5% to 95%, non-condensing
Protection
DC Rail Trigger Point/Range
Over Voltage Protection
+3.3V trip point 4.5 Vmax
+5.0V trip point 7.0 Vmax
+12.0V trip point 15.6 Vmax
Over Current Protection
+3.3V 33A ~ 50A
+5.0V 33A ~ 50A
+12V1 & +12V2 22A ~ 35A
+12V3 & +12V4 42A ~ 60A
Under Voltage Protection
+3.3V trip point 2.0 Vmin
+5.0V trip point 3.3 Vmin
+12.0V trip point 8.5 Vmin
Short Protection All output to GND