Datasheet
IP01 - USB Programming Interface
(FT232R)
Front
Back
Main Category Interface
Sub Category Programmer
Introduced 1 January 2017
Current version 1.0.4
Current version date 1 January 2017
Weight 5.4 g
Height 5.9/5.4/1.6 mm
Non-
☒
BUS Connections
South USB A
Main Chip Set
Main Chip FT232R
EEPROM Memory Size 1024 bit
Serial Configuration
Default Setting DCE/DTE and A/B
Change Setting Switch
XinaBox Datasheet IP01 - USB Programming Interface
Contents
1 Overview
2 Applications
3 Specifications
4 External Links
Overview
This xChip forms part of the interface programmer modules.
The FT232R is a USB to serial UART interface device which is equipped to power and program
other modules via a USB A connector. The IP01 is required for programming the range of CPU
Core xChip over the USB-serial bridge provided by the FT232R.
The IP01 is unable to program the CC03, whereaas the IP02 is able to do so.
Product Highlights
Based on FT232R From FTDI Limited
USB (https://en.wikipedia.org/wiki/USB) A connector for simple connectivity without the
need of a cable
Programming interface for core ☒CHIPs such as CW01, CR01 and CC01
Equipped with switches that allow the user to switch serial and programming
configurations
RGB LED for programming indicators
Applications
Serial Programming of ☒CHIPS
Serial Interface for debugging
Serial Data Monitoring
USB-Serial Internet Link for IoT Devices
Specifications
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 1024 bit EEPROM for storing device descriptors.
Data transfer rates from 300 baud to 3 Mbaud.
128 byte receive buffer and 256 byte transmit buffer utilizing buffer smoothing technology
to allow for high data throughput.
Unique USB FTDIChip-ID™ feature.
Transmit and receive LED signals.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space /
no parity.
FIFO receives and transmits buffers for high data throughput.
Device supplied pre-programmed with unique USB serial number.
UART signal inversion option.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
External Links
GitHub
IP01 on GitHub (https://github.com/xinabox/IP01)
Drivers
FTDI Drivers (http://www.ftdichip.com/Drivers/VCP.htm)