Datasheet

IP02 - Advanced USB Programming
Interface (FT232R)
Front
Back
Main Category Interface
Sub Category Programmer
Introduced 1 January 2017
Current version 1.0.1
Current version date 1 January 2017
Weight 6.3 g
Height 9/0/0 mm
Non- ☒ BUS Connections
South USB A
Main Chip Set
Main Chip FT232R
EEPROM Memory Size 1024 bit
XinaBox Datasheet IP02 - Advanced USB Programming
Interface
Contents
1 Overview
2 Applications
3 Specifications
4 External Links
Overview
This xCHIP forms part of the interface programmer modules.
The FT232R is a USB to serial UART interface device which is equipped to power and program
other modules via a USB A connector. The IP02 is required for programming the range of CPU
Core xCHIPs over the USB-serial bridge provided by the FT232R.
The IP02 has two switches so that you can switch between DTE and DCE. The other switch is
between A and B.
Product Highlights
Single chip USB to asynchronous serial data transfer interface.
Transmit and receive LED drive signals.
Low operating and USB suspend current.
Low USB bandwidth consumption.
USB 2.0 Full Speed compatible.
Applications
Serial Programming of xCHIPs
Serial Interface for debugging
Serial Data Monitoring
USB-Serial Internet Link for IoT Devices
Specifications
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
Data transfer rates from 300 baud to 3Mbaud at TTL levels.
128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology
to allow for high data throughput.
FIFO receives and transmits buffers for high data throughput.
Supports bus powered, self-powered and high-power bus powered USB configurations.
Integrated power-on-reset circuit.
External Links
GitHub
IP02 on GitHub (https://github.com/xinabox/IP02)
