Datasheet

IP03 - SWD/JTAG/SPI/USB Interface
(AP2114)
Front
Back
☒ CHIP
Main Category Interface
Sub Category Programmer
Introduced 1 January 2017
Current version 1.0.1
Current version date 1 January 2017
Dimensions
Size 2x2U (32x32mm)
Weight 5.6 g
Height 11.3/8.0/1.6 mm
Non- ☒ BUS Connections
North ☒BUS & ☒PDI
East USB Micro B
Main Chip Set
Main Chip AP2114
XinaBox Datasheet IP03 - SWD/JTAG/SPI/USB Interface
Overview
This xCHIP is an interface module and is equipped to interface with SWD (https://en.wikipedia.org/
wiki/JTAG#Serial_Wire_Debug), JTAG (https://en.wikipedia.org/wiki/JTAG) and SPI (https://en.wiki
pedia.org/wiki/Serial_Peripheral_Interface_Bus) programmers to program other xCHIPs via ☒PDI
and ☒BUS. Voltage regulation from USB power is provided by on-board AP2114 LDO, which
features 1 A continuous current output, good output regulation accuracy and short circuit
protection.
Product Highlights
Multifunctional Programming Interface Headers
SWD/JTAG/SPI Interface
Facilitates Low and High Level Programming
USB Data Throughput on ☒PDI
USB Power Supply
Specifications
AP2114
Output Voltage Accuracy: ±1.5%
Output Current: 1A
Fold-back Short Current Protection: 50mA
Low Quiescent Current: 60μA
Low Output Noise: 30μV RMS
OTSD Protection
Operating Temperature Range: -40°C to 85°C
External Links
GitHub
IP03 on GitHub (https://github.com/xinabox/IP03)
