Datasheet

PG01 - 5-24v Power Supply (TS30011)
Front
Back
☒ CHIP
Main Category Power
Sub Category 5-24v Power Supply
Introduced 1 January 2017
Current version 1.0.0
Current version date 1 January 2017
Dimensions
Size 2x2U (32x32mm)
Weight 4.4 g
Height 12.5/0/0 mm
Non- ☒ BUS Connections
North Terminal Block
Main Chip Set
Main Chip TS30011
XinaBox Datasheet PG01 - 5-24v Power Supply
Overview
This PG01 uses a TS30011 synchronous buck convertor to connect ☒CHIPS to a wide range if DC
power sources.
The TS30011 is a DC/DC synchronous switching regulator with fully integrated power switches,
internal compensation, and full fault protection. The TS30011 utilizes current mode feedback in
normal regulation PWM mode. When the regulator is placed in standby, the device draws less than
10uA quiescent current. The TS30011 integrates a wide range of protection circuitry including input
supply under-voltage lockout, output voltage soft start, current limit, and thermal shutdown.
Product Highlights
5 - 24V Wide input voltage range
+/- 2% output tolerance
1MHz +/- 10% fixed switching frequency
Continuous output current: 1A
Specifications
+/- 2% output tolerance
5 - 24V Wide input voltage range
1MHz +/- 10% fixed switching frequency
Continuous output current: 1A
High efficiency – up to 95%
Current mode PWM control with PFM mode for improved light load efficiency
Input supply under voltage lockout
Soft start for controlled startup with no overshoot
Cycle-by-cycle current limit with frequency foldback
Full protection for over-temperature and VOUT over-voltage
Less than 10uA in standby mode
