- Xincom Dual-Port Broadband Gateway User Guide

XiNCOM Corp.
5: Advanced LAN Configuration
verview
ns and settings are provided to deal with non-standard situations, or to provide additional
ptions for advanced users.
a DHCP Server, and you wish to continue using it, the following configuration
required.
• The DHCP Server function in the XC-DPG Twin WAN Router must be disabled. This setting is
on the LAN & DHCP screen.
• Your DHCP Server must be configured to provide the XC-DPG Twin WAN Router's LAN IP
address as the "Default Gateway".
• Your DHCP Server must provide correct DNS addresses to the PCs.
Routing
This section is only relevant if your LAN has other Routers or Gateways.
If you don't have other Routers or Gateways on your LAN, you can ignore the Static Routing
page completely.
•
O
These scree
o
Existing DHCP Server
If your LAN already has
is
•
If your LAN has other Gateways and Routers, you must configure the Static Routing screen as
described below. You also need to configure the other Routers.
Figure 30: Static Routing
Page 57