User Manual

ManualsBrandsXing Da Electronics ManualsOtherXing Da Electronics EB028 Half-in-Ear TWS Earphones

Table Of Contents

① Earbuds Muti-function Touch Control (Touch controls located on inside of earbud stem)

② Power case charging button (Located on back/center of case)

③ Charging Case LED

④ Type-C Charging Port

⑤ Type-C Charging cable

Charging:

** The battery isolator on both earbuds needs to be removed to be charged. Be sure to charge the

devices completely before initial use. **

1. Charging the earbuds

 When put the earbuds in the charging case, the earbuds will be charged directly.

Long press the power button on the charging case to stop charging the earbuds, short press

to start charging earbuds.

 No LED indicator on earbuds and solid green LED on charging case when charging,

 LED on charging case will turn off when earbuds are fully charged.

 When the earbuds are low on power, a tone will be heard indicating that earbuds need to be

recharged.

2.Charging the power case

 Use the Type-C cable to connect to an adapter or computer to charge the power case.

 Red LED flash when charging.

 LED turn to solid red when fully charged.

Summary of content (5 pages)

PAGE 1
① ② ③ ④ ⑤ Earbuds Muti-function Touch Control (Touch controls located on inside of earbud stem) Power case charging button (Located on back/center of case) Charging Case LED Type-C Charging Port Type-C Charging cable Charging: ** The battery isolator on both earbuds needs to be removed to be charged. Be sure to charge the devices completely before initial use. ** 1. Charging the earbuds  When put the earbuds in the charging case, the earbuds will be charged directly.
PAGE 2
Earbuds Usage: 1. Pairing: First time  Remove both earbuds from the case, they will begin to auto-pair to each other. You will hear a voice prompt saying "Power On”.  The earbuds will now both make tone sound informing you that the earbuds are now paired to each other.  Now activate Bluetooth on your mobile device. If the pairing is successful, only one "Bawl 2.0 TWS” pairing name will appear. 2. Search and Pairing  Select “Bawl 2.0 TWS” from your Bluetooth function.
PAGE 3
Earbud Tech Specifications Items Charging time Play time Battery Input Specifications 1.5 hrs (from 0-100) 4 hrs at max volume 3.7V/40mAh/0.148Wh DC5V/32mA Power Case Tech Specifications Items Specifications Charging time 1.5hrs (from 0-100) Battery 3.7V/180mAh/0.666Wh Input DC 5V/150mA Fully charged, the case can charge the earbuds 4 times. Mobile devices cannot connect with the earbuds if the earbuds are not in pairing mode.
PAGE 4
PAGE 5
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.