Instruction Manual

Wireless headphone
Instruction Manual
FCC ID:
2ADK3XO-9728-1
1 x Bluetooth Headphones
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
Playing Time: 3 hours (at max volume)
Charging Time: 2 hours
Pairing Name: “Light Up Headphones”
Battery: 3.7V/400mAh Li Polymer
Charging the Earbuds:
Connect the provided USB cable to a
regulated USB adapter. Connect the
Micro-USB end of the cable to the charging
port of the headphones.
LED indicator will turn RED when charging,
once fully charged LED will turn OFF.
Bluetooth
®
Connection:
Press and hold ON/OFF Button to turn ON
the headphones, headphones will prompt
pairing mode.
Turn on the Bluetooth function on mobile
device, Select “Light Up Headphones”
pairing name.
LED will turn solid BLUE if successfully
paired.
Long press ON/OFF button to turn off
device.
Call Controls:
When receiving a phone call, press the
multifunction button to answer and press
again to end call.
Double Press the multifunction button to
redial the last number called.
Music Controls:
Single press Multifuction button to Play/
Pause audio.
Short press Vol+ to increase volume.
Long press Vol+ to skip to the next track.
Short press Vol- to decrease volume.
Long press Vol- to skip to previous track.
Aux Connection:
Connect a AUX cable(NOT INCLUDED) to
the 3.5mm Aux Input of the headphones
and mobile device to play music directly.
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
The unit’s full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. For
professional. Incorrect reassembly may
excessive temperature.
use only identical replacement parts to
ensure product safety
1.
•
•
2.
•
•
•
•
3.
•
•
4.
•
•
•
•
•
5.
•
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
5.
6.
7.
8.
•
•
•
•
Vol+/Next Track
Vol-/Prev Track
Micro USB Input
3.5mm Aux Input
LED Indicator
Microphone
Multifunction Button(Play/Pause)
ON/OFF Button
What’s included:
Functions:
Instructions: SAFETY PRECAUTIONS:
MADE IN CHINA
FCC Warning
This device complies with part 15 of the FCC rules. Operation
is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any inte rference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interferenceto radio or television reception,
which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and
receiver.
· Connect the equipment into an outlet on a circuit different
from that to which the receiver is
connected.
· Consult the dealer or an experienced radio/TV technician for
help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure
requirement. The device can be used
in portable exposure condition without restriction.
SIZE:165*89MM