Installation Instructions

Setting temperature :
To set the temperature , first make sure you are in time mode.
- When in time mode, press the[ ]button to toggle between Celsius to Fahrenheit.
NOTE: You must be in alarm mode to turn the alarm and custom snooze ON or OFF.
Snoozing the Alarm
Note: The snooze function must be ON in order to snooze the alarm.
When the alarm is ringing, tap the top of clock or press the [ ] button or the [ ] button
to snooze the alarm. When the snooze function is on, the the [ ] icon will flash.
To completely disable the alarm until the next day, press the [ ] button.
Wireless Charging
Connect the provided charging cable to a 5V/2A power source and to the micro USB port on
the clock.
Please Qi wireless charging enabled devices on top of the clock, the devices will be charged
automatically.
LED indicator will turn blue when charging.
LED indicator will flash in red and blue alternatively when put non wireless charging enabled
devices on top of the clock.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.