User's Manual

19
32
n Ringer Setting
You can select your own external (from the
telephone Network) or internal (from other
handsets registered to the same base) ring tone
and adjust the volume.
1.Press the soft key.
2.Press or key to choose
menu, then press the soft key.
3.Press or key to choose ,
press the soft key.
4.Press the soft key to choose
or press the key to choose
, press the soft key.
5.Press or key to choose or
, press the soft key.
Menu
HS Settings
Select
Ring Setup
Select
Select INT
Ring EXT
Ring Select
Melody
Volume Select
Result: You can select the ring tone from
Melody 1 to 10 or adjust the volume
fromVolume1to5,oroff.Whenyou
adjust the ring tone or volume, the
phone plays the selected melody or
sounds the selected loudness.
6.Press the soft key to confirm.Save
Note
Off
New Call
:
If you set the volume to " ", when a
call comes in, only the
information appears on the LCD.
Adding the Phone book Entries
Phonebook
Select
Select New
Name ?
Next
Number ?
Next
Save
soft
3. Press the soft key to choose .
4. The display shows " ". Enter the name
you want to use, then press the soft key
to confirm. The display shows " ".
Enter the desired number (up to 20 digits),
press the soft key.
5.*Use to select the ring you like to
associate with the number, press the
soft key to confirm.
6. Repeat if necessary.
1. Press the soft key.
2. Press to choose , press
the key.
Menu
the key
or key
Using a Pause
Viewing the Phone book Entries
A pause is useful when you access an interactive
voice response system, such as an automated
banking system. A pause provides a delay of 3
seconds. If you want to insert a pause when you
dial a number in standby mode or store a number
in memory, press the key. The letter will
appear at the pause entry.
1. In the standby mode, press the key.
2. Press repeatedly until the desired
entry is displayed.
P
or key
Note:
Erase
If you make a mistake while entering a
number, use the soft key to correct it.
Each time you press the key, the last digit is
deleted.
* If you want to set a VIP number, you should
select a special ring tone for it. The ring tone
should be different from the external ring you
have set. You can set up to 9 VIP ring tones
associate with 9 VIP numbers/groups.