801xyyTP227F;CL-3398 USER' S MANUAL
Contents Prior To Use 1 Congratulations 1 Safety Precautions 1 3 Unpacking Phone Layout and Keys Function 4 Keys Description 6 LCD Window Icons Description 8 Connecting Lines 9 Installing Batteries 9 10 Charging Handset Turning Handset On/Off 11 Basic Functions Making a call Receiving a call Muting the Microphone Adjusting Voice Volume Ringer Setting Last Number Redial CID Book Key Lock Auto Answer Selecting a Language HS Name Range Alarm Paging Dial Mode Handsfree Flash Signal 12 12 13 14 14 15 16 18 2
Contents If you subscribe to a DSL service Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: - Noise is heard during conversations. - Caller ID features do not function properly.
Prior To Use Technical Specifications n Congratulations on purchasing our high quality product. Please read the manual carefully to find out all features and how your telephone works, so you can get the best out of your new phone. n Safety Precautions To reduce the risk of electrical shock and injury, please follow these basic safety precautions before using the phone. 1. Carefully read and observe the instructions in this manual. 2. Follow all warnings marked on the unit. 3.
7. Unplug this phone from the wall outlet and refer servicing to qualified service personnel only. Troubleshooting 8. Pay attention to the polarity of the batteries, insert the rechargeable batteries in accordance with polarity symbols (this instruction is found in the installing batteries section.) Symptom No operation 41 Check & Remedy Check that the power adapter is properly connected. Check that the telephone line cord is properly connected. Check that the handset batteries in full power.
n Unpacking Feature List Once you have unpacked your phone, make sure that all the parts shown below are available. If any pieces are missing or broken, please promptly call your dealer. Base 4 AAA Ni-MH batteries Charger 2 Handsets 2 Adapters* User's manual Line cord* * The shape of the plug can vary according to each country’s specification. 3 DECT 6.
n Phone Layout and Keys Function n Caller ID on call waiting When you subscribe to Call Waiting service from your local telephone company, the telephone will display the name and number of the second caller while you are having a conversation. Caller ID info displayed Caller 1 4361234 Caller two's information is displayed Caller 1 4 Caller 2 2915678 Note: If you have transferred an external call to another handset, you cannot use the call waiting function via the second handset.
n Phone Layout and Keys Function (continued) Setting up a 3-way conference call When you have both an external call and an intercom call in progress, you can set up a threeway conference call, like this: Base Rear and bottom View key and 1. During an external call, press the then enter the number of the handset you want to join the 3-way call. 2. The called party press Charge pins Phone Line Jack Power Jack key to answer. 3. The calling party can press the the 3-way call. key to start 4.
n Calling with more than one Handset If you have more than one handset registered to the same base, you can make internal calls and transfer an external call between the registered handsets. Making an internal call 1. Press the key, the LCD displays as follows, then enter the number of the handset you want to call. Note: During the internal call, if an external call comes in, the LCD will show the caller's number.
n Keys Description (continued) Right/Redial key Enter the redial book, as described in page 16. Insert a pause when pre-dialing a number. Left/Right soft key Perform the functions indicated by the text immediately over it (on the bottom line of the display) which changes time by time. key Press and hold to turn on/off keypad lock function. Set up a conference call, as described in page 38. n Registration The supplied handsets are already registered with the number 1 and 2.
Selecting a Base HS Reset This function allows you to select a base from those already registered to the handset. You can access the options by scrolling the menu. If you reset the handset, all the features under HS Settings menu will be restored to the factory initial setting: Alarm, Audio Setup, Ring Setup, Tone Setup, Language, HS Name, Auto Answer and Date & Time. But LCD Contrast can not be restored. 1. Press the Menu soft key. 2. Press or key to choose HS Settings , then press the Select soft key.
n Connecting Lines LCD Contrast Setting The adjustment allows you to optimize the visibility of the display by changing its contrast according to the environment conditions. 1. Connect one end of the phone line cord to the phone line jack of the base, and the other end to a standard phone wall outlet. 2. Connect the modular ends of the AC power adapters to the power jack of the base and charger, then plug the AC adapters into standard AC wall outlets. DC 7.5V 1. Press the Menu soft key. 2.
Audio Setup Key Tone n Installing Batteries (continued) You can also use the menu to adjust the audio volume. Every time you press a key, your handset acknowledges it with a key tone. You can disable the key tones for a silent use. I n certain error conditions, a warning tone will sound when an incorrect key is pressed. 3. T o r e p l a c e t h e b a t t e r y cover, slide the cover up until it snaps in place. 1. Press the Menu soft key. 2.
n HS Settings n Turning Handset On/Off If the handset is in power off mode, when you place the handset on the base, it automatically turns on. To turn the handset on or off in standby mode, follow these steps: 1. To turn on the handset when it's off , press and hold the key until you switch the display on. On power up, the handset will enter subscription mode and search for a registered base. A message as shown below will be displayed to the user, and the signal icon will flash. Searching... 2.
Modify PIN BS Reset This function allows you to change the PIN number of the currently active Base. The default PIN is 0000. If you reset the base, all the features under BS Settings menu will be restored to the factory initial setting: Dial Mode and Flash Time. 1. Press the Menu soft key. 1. Press the Menu soft key. 2. Press or key to choose BS Settings , then press the Select soft key. 2. Press or key to choose BS Settings , then press the Select soft key. 3.
n Receiving a Call n BS Settings When a call is received, t he In use indicator on the base will blink. The New Call information will appear, too. If the caller can be identified, the caller's phone number is displayed. If the caller cannot be identified, only the New Call information displays. If you have a voice message, the icon and " MSG WTG ON " will be shown on the LCD. Result: After you hang up, the LCD displays the call duration. 2.
Dialing a Number from Phone book Deleting the Phone book Entries Find out the number you want to dial. Refer to "Viewing the Phone book Entries". Then press the key or Dial soft key. 1. Press the Menu soft key. Editing the Phone book Entries 1. Press the Menu soft key. 2. Press the key to choose the Phonebook , press the Select soft key. key to choose Edit menu. Press 3. Press the the Select soft key. or key repeatedly until the entry 4.
n Ringer Setting Adding the Phone book Entries 1. Press the Menu soft key. You can select your own external (from the telephone Network) or internal (from other handsets registered to the same base) ring tone and adjust the volume. 1.Press the Menu soft key. 2.Press or key to choose HS Settings menu, then press the Select soft key. 3.Press or key to choose Ring Setup , press the Select soft key. 4.Press the Select soft key to choose INT Ring or press the key to choose EXT Ring , press the Select soft key.
n Phone Book n Last Number Redial The phonebook built in your cordless phone allows you to store frequently used numbers so that you can easily make a call without having to remember or enter the phone number. 1. Press the key or the Redial soft key in standby mode. Character Map Result: The LCD displays the last number you dialed.
Add to PB: allows you to add the number to the phone book. Complete storing the entry by starting from step 4 described in par."Adding the Phone Book Entries" (obviously, you will find the number already entered in the appropriate field). Delete: allows you to delete the selected number. Delete All: allows you to delete the whole redial book. 4. To return to standby mode, press the key.
n CID Book Advanced Functions n Menu Navigation To access a menu option: To return to standby mode: 1. To display menu items, press the Menu soft key. If you press the Back soft key from any menu, the phone returns to the previous screen. 2. To scroll through menu options, press the or key repeatedly. To return to standby mode, press the 3. To select a menu, press the Select soft key when the desired menu appears on the LCD. 4. Repeat if necessary. key.
4. Press the Select soft key, you are prompted to enter the name. 5. Enter the name and press the Next soft key, then you can modify the number you want to store. 6. Press the Next soft key, you are able to select the ring tone from Melody 1 to Melody 10, press the Save soft key to confirm and exit, you will hear a confirm beep. or key to choose Delete , press 5. Use the Select soft key. The display will show " Confirm ? ".
n Paging You can page the handset from the base unit making it ring with a special tone. It's useful to locate a lost handset. Press the key on the base unit (less than 5 seconds), all the handsets registered to the base will ring for about 60 seconds. n Key Lock To stop paging, press the or any key on the handset. key on the base again Note: On a long key press, more than or equal to 5 seconds, the base will enter subscription mode. For details, see page 36.
n Auto Answer With this feature, you can answer a call by just picking up the handset from the base without pressing any key. 1. Press the Menu soft key. 2. Press or key repeatedly to choose HS Settings , press the Select key. n HS Name 3. Use or key to choose Auto Answer , then press the Select soft key. 4. Use the or key to choose On / Off to enable/ disable the function, then press the Save soft key, you will hear a confirm beep.
Customer Information 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label that contains, among other information, a product identifier of [US: 6NYW400B3398]. If requested, this number must be provided to the telephone company. 2. If this equipment [DECT 6.0 Cordless Phone] causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation.