User's Manual

20
23
n Key Lock
If you turn on this feature, all keys will be locked.
You can answer calls by using the key. But
when you hang up, the phone returns to the
locked mode. This feature is useful to avoid
pressing keys by mistake.
To lock the keys, in the standby mode just keep
the key pressed till the display shows "
", then the icon appears.
HS
Locked
To unlock the keys, keep the key pressed
again till the key lock icon disappears from
the display.
Note
HS Locked
:
In locked mode, if you press any key, the
phone will generate a warning tone, and the
" " message will be redisplayed.
n Paging
n Dial Mode
To stop paging, press the key on the base again
or any key on the handset.
You can page the handset from the base unit
making it ring with a special tone. It's useful to
locate a lost handset.
Press the key on the base unit (less than 5
seconds), all the handsets registered to the
base will ring for about 60 seconds.
You can select to change the dial mode by the
following steps:
1. Press the soft key.
2. Press repeatedly to choose
, and press the soft key.
3. Press the to choose , then
press the soft key.
Menu
BS
Settings Select
Dial Mode
Select
or key
key
4. You can press to select the required
dial mode options ( / ) and press the
soft key. A confirm beep will be heard.
Tone Pulse
Save
or key
Note:
If you are not sure which dialing mode should
be selected, please contact your local service
provider.
Note:
On a long key press, more than or equal to
5 seconds, the base will enter subscription
mode. For details, see page 36.