Bluetooth wireless headset User's manual BT 103
Additional Information If not use original accessories could be risky and the warranty is void should cause by using original accessories. Do not expose your battery in an environment temperature above +55 deg C(+131 deg F). If the battery is operated in cold temperatures , the battery capacity is reduced. Use your battery in room temperature for maximum battery capacity. The battery can only be charged when the temperature is between +10 deg C(+50 deg F) and +45 deg C (+113 deg F).
Additional Information CONTENTS Additional Information Product Care Potentially Explosive Atmospheres Power Supply Emergency Calls Battery Information Battery Information 22 22 23 23 24 25 New Batteries The battery is not fully charged when it is new. For first time, please charge for 24 hours before using. Low Battery When the battery is low, there will be 5 fast beeps every 20 seconds to alert the user.
Additional Information Before attempting to clean, please unplug the unit from any power source to avoid potential electric shock. The charger is designed for indoor use only, and must not be used outdoors. Note: For queries about any exceptions when using Bluetooth equipment, due to national requirements or limitations, please visit www.bluetooth.com .
Safety and General Information Aircraft When instructed to do so, turn off your device when on board an aircraft. Any use of a device must be in accordance with applicable regulations per airline crew instructions. Medical Devices Hearing Aids Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss the alternatives.
Additional Information Product Care If not use original accessories may result in performance, deterioration, product damage, injury, or electronic shock, and warranty termination. Do not attempt to disassemble your headset, as it does not contain any components serviceable or repairable by consumers. Do not paint your product as the paint could prevent normal use. Do not place the headset in a dusty area, and only use soft cloth to clean your headset.
Operating Your Headset Preface Bluetooth Headset BT 103 is a cordless mobile solution built on Bluetooth wireless technology. Please read the instructions before using your headset. What is Bluetooth Wireless Technology? Bluetooth wireless technology propels you into a new dimension in connectivity. Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility.
Operating Your Headset With charger attached Headset Action When charging headset Charging headset complete Operating Your Headset General Headset LED ON (steadily) To be able to use the headset together with a mobile phone, or any device to be compatible with Bluetooth wireless technology and the Headset Profile. OFF Note: When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED turns off.
Operating Your Headset 1. Indicator LED Provides visual cue about headset status. 2. Volume Down key Adjusts speaker (receive) volume down. 3. Volume Up key Adjusts speaker (receive) volume up. 4. Multi-function button ( MFB) Controls several headset functions. 5. Microphone Picks up your voice input. 6. Speaker Plays the sound you receive on the call. 7. Ear Clip Attaches headset to ear. 8. Charging Port Receives the plug for your battery charger.
Operating Your Headset Function Device Status Phone Headset Action Hands Free Profile Charging Your Headset ON (in call Toggle nd with 2 call ON between st (in call) 1 call 2 active calls on hold) Long-Press MFB to place the 2 nd call on hold and answering the 1 st call. First Time Use Before you can use your headset, you need to charge its self-contained Li-ion battery for 24 hours.
Operating Your Headset Operating Your Headset How to Charge 1. Plug the charger into the headset. 2. After a full charge, remove the charger from the electrical outlet, and detach the charger cord from the headset. Note: Please use the charger the same as we offered . 8 Device Status Function Phone Headset ON (in call) Action Hands Free Profile Ending a call ON (in call) Rejecting a call ON(phone ON (ring) ring) Long-Press MFB to reject the call.
Operating Your Headset Function 16 Device Status Phone Headset Action Hands Free Profile Pairing / Bonding -- OFF Extended-Long-Press MFB for more than 3 seconds until LED solidly ON. Headset to be discovered by another Bluetooth device for 2 minutes. Power OFF -- ON (idle) Extended-Long-Press until headset power OFF. Headset OFF, a series of 4 tones play on speaker (high to low) and LED OFF. Make a voice dial call ON ON (idle) Short-Press MFB once, speaks the name and phone dials the call.
Operating Your Headset Right or Left Ear Use The direction of the ear clip has to be changed should you decide to wear the headset on your left ear. To Adjust the Ear Clip for Left-ear Use: Operating Your Headset Placing and Receiving Calls Your headset supports both Hands Free and Headset Profiles. Accessing call functions depends on which profile your phone supports. You can activate call functions for Hands Free Profile according to the following table: Note: 1.
Operating Your Headset Operating Your Headset confirm to pair successfully with 10 rapid flashes. 5. The phone information is now stored in the headset memory. Turning the Headset On or Off Note: 1.Make sure the headset and the device you are using with are no more than 10 m./33 ft. apart, so they are within operable range. To Turn the Headset On Press and hold the headset MFB until the headset is power ON. A series of 4 tones (low to high) can be heard from the speaker and the LED flashes 2 times (0.
Operating Your Headset Operating Your Headset Listening Volume Adjustment Pairing Headset listening volume can be adjusted during a call. Pairing Your Headset and Phone "Pairing" creates a link between devices equipped with Bluetooth wireless technology and allows the phone to remember the headset's unique ID; you could add it to a list of paired device in the phone. The headset should be paired once with the phone before use.