Bluetooth Speaker Model Name: BT-125 Brand Name: iCreation FCC ID: QMHBT125
Quick Start Guide The detailed product description below will help you to have a better understanding of our product. In order to use it correctly, please read the relevant information carefully before you use it. 1. Brief Introduction Overview LED Light Multi-function Button Volume Volume + 2.
charging 2.2 Power on/off 2.2.1 Power on: Hold the MFB for 3 seconds until you see blue LED flashing to power on the device. 2.2.2 Power off: In standby status, hold the MFB for 3 seconds until you see the red LED flashing to power off the device. 2.3 Volume Adjust: 2.3.1 Volume Up: Press VOL+ once every time to adjust the volume 2.3.2 Volume Down: Press VOL- once every time to adjust the volume 2.4 Paired with and connecting A.
3.2.1.Lower BT-125,Mobile phone/device volume. 3.2.2. If low battery capacity, please charge it. 3.3 Can not paired with Bluetooth device 3.3.1.Make sure that your mobile phone/device is compatible with Bluetooth. 3.3.2.Please pair with the device again (refer to 2.4 Paired with and connecting) 3..4 Signal loss or distortion 3.4.1.Move BT-125 to the place near the mobile phone/device 3.4.2.Ensure charged 3.4.3.Power off the BM6,Mobile phone/Device,then re power on. 4.
Important Regulatory Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
