User's Manual

8
Connecting
Connect the plug of the power supply to the power jack of
the base, and then plug the power supply into a standard
AC wall outlet.
Charging
The BT handset has a built-in
rechargeable Li-Polymer battery.
Before initial operation, fully charge
the BT handset for 6 hours or more.
To charge the BT handset or
iPhone, simply place it on the base.
BT Handset & iPhone
To AC wall outlet
Notes:
The red indicator light is on during the charging, and it is
off when the battery is fully charged.
When the battery is low, the handset beeps once every
30 seconds and the red indicator flashes every 30
seconds. Charge it as described above, or else the
handset will shut down when battery is very low.
13
Chapter 3: Operations
Making a Call
Make calls on the iPhone in normal ways.
During a call, you can switch between your BT handset
and your iPhone.
Using the iPhone
Call Switching between the BT Handset and an iPhone
During a call using the iPhone, click on the display
of the iPhone, then click . The call switches
to the .
To switch back, click on the iPhone. The
call switches back to the iPhone.
BT handset
1
2
If the iPhone supports voice dialing, press MFB twice
on the BT handset . When a beep
occurs, say the desired number.
within 0.8 seconds
Voice Dialing
During a call, press and hold and buttons for about 2
seconds to switch the call between the BT handset and
the iPhone.
+-
Method 1: Using the iPhone
Method 2: Using the BT Handset