User's Manual

who shares your workspace)
l
The
right panel
has a column titled
Name
and other columns whose headings and contents will vary
according to the type of device selected in the left panel (for example, when you select New Devices in
Range and click Refresh, your will see the Name, Device Class or type, hardware Address, and the
Service or Services available on that device). The right panel will be blank until you click the
Refresh
icon
or menu item.
Refresh and Connect
To begin the process of setting up connections with other Bluetooth devices:
1. Be sure the Bluetooth environment is running (the Xircom Bluetooth icon will be present in the System
Tray), and that the Radio On checkbox is checked. Be sure the remote device is powered on, discoverable,
and within range.
2. Select New Devices in Range and click Refresh on the Edit menu or toolbar. BlueView will detect and
display all new (that is, unknown) Bluetooth devices that are within 10 meters (30 feet) and
"discoverable" (that is, have been configured to respond to inquiries from other devices; remote devices
configured as "non-discoverable" will not be displayed). The Name, Device Class, Address, and available
Service or Services on the device will be displayed.
3. If no Bluetooth devices are found but you know there's one in range, click the "Discoverable" icon on the
remote device (slave), and click Refresh again on your device (master). The remote device will remain
discoverable for 2 minutes (or until you click Cancel on the Discoverable screen).
Page
5
of
9
Xircom Bluetooth Adapter
-
Make Connections Using BlueView
6/22/2001
file://C:\Compliance\Manuals\R2BT\En\help\blueview.htm