User's Manual

6. Click OK, double-click the Xircom Bluetooth LAN Access icon and choose Connect. Dialing will start, User
Name and Password will be verified and you will be logged onto the network. Your PPP Link is set up and
you are ”on” the network. You can verify your settings using “winipcfg” (for Windows 95, 98, or Me) or
“ipconfig” (for Windows 2000), which you can obtain from the Access Point or you local DHCP-server.
7. To terminate the LAN connection, first disconnect the Dial-Up connection, then disconnect the Bluetooth
connection.
Known Access Point Limitations
l
Some Bluetooth Access Points may not support the Bluetooth LAN Access Profile or the Bluetooth Dial-Up
Networking Profile.
l
Some current models of Bluetooth Access Points don't support Multipoint, which means that only one
person at a time can use this connection. If the connection fails, check to be sure that no one else has this
Bluetooth connection open.
How to Reset the Bluetooth Environment
Page
9
of
10
Xircom Bluetooth Adapter
-
Applications
6/22/2001
file://C:\Compliance\Manuals\R2BT\En\help\applications.htm