User Manual

13
Uninstall Drivers under Windows 98SE and Windows Me
1. Right-click the My Computer icon and select Properties.
2. Select the Device Manager tab.
3. Under Network Adapters find and select the Intel PRO/Wireless 5000 LAN Mini-PCI
Adapter from the displayed list.
4. Click Remove. Windows removes the adapter.
How to Uninstall PROSet II Utility Software Using Add/Remove Programs
1. Open the Start menu, select Settings, and then select Control Panel.
2. Double-click Add/Remove Programs.
3. Find Intel(R) PROSet II.
4. Click Install/Uninstall or Change/Remove.
5. If you have installed the Access Point Administration Tools, repeat Steps 2 through 4 to
uninstall those tools.
How to Uninstall Wired Drivers and PROSet II Software Using the Intel® PRO Intelligent
Installer
The following instructions apply to drivers for Intel PRO wired adapters and PROSet
software only. To remove the adapter drivers, use the instructions above under How to Uninstall
Mini-PCI Adapter Drivers Using Device Manager.
1. On the Intel® PRO Network Connections screen, click the menu item Install Software.
If the menu screen is not visible, remove and re-insert the Intel CD-ROM to display it, or
run autorun.exe from the Intel CD-ROM.
2. On the Program Maintenance screen, select Remove and click Next. Wired drivers and
PROSet software will be removed.
3. On the next screen, click Finish. Click OK to close the log file.
Reinstalling Adapter and Utility Software
To reinstall PRO/Wireless hardware and software, first uninstall the PRO/Wireless 5000 LAN
Mini-PCI Adapter drivers and software as described under the heading Uninstalling Adapter
Drivers and Software. After uninstalling, reboot the computer, then reinstall the PRO/Wireless
5000 LAN Adapter using the installation
instructions in this document.