User's Guide

XT6264 User Guide
P a g e 10 | 14
CONFIDENTIAL AND PROPRIETARY
Disclosure, storage and use subject to non-disclosure agreement
Battery Status (Yellow)
• All five yellow LEDs will flash yellow for two seconds to indicate the device will provide battery
status.
• From left to right the backup battery value is indicated using solid yellow LEDs, which are held
for five seconds.
LED
Voltage
Left most LED (blinking)
Volt < 2.9
One LED
2.9 < Volt < 3.2
Two LEDs
3.2 < Volt < 3.5
Three LEDs
3.5 < Volt < 3.8
Four LEDs
3.8 < Volt < 4.0
Five LEDs
4.0 < Volt
Backend, AC, Reefer, Zigbee, and Bluetooth (Red)
• All five LEDs will flash red for two seconds to indicate the device is providing miscellaneous
status.
• LEDs are displayed from left two right and held for five seconds.
LED Position
Description
First
Backend connectivity status: Green if data session active or no messages queued.
Red if messages queued and no data session active.
Second
AC Status: Green if AC applied, Red if no AC.
Third
Reefer Connectivity: Green if last communication with reefer was successful, Red
otherwise.
Fourth
Zigbee Status: Green if device is in network otherwise Red.
Fifth
BLE Status: To be determined.
NOTE: Test mode should now be complete, and all LEDs will turn off.