User's Guide

XT6264 User Guide
P a g e 7 | 14
CONFIDENTIAL AND PROPRIETARY
Disclosure, storage and use subject to non-disclosure agreement
2.3 TESTING AFTER INSTALLATION
1. Connect the power plug to the power source.
2. Put the unit into install mode (ON/OFF button) – see Enter Install Mode for further description.
3. Observe installer LED for green pass – see observe Install LED below for further description.
NOTE: if installer LED fails, refer to the trouble shooting guide and fix the issue.
4. Take the unit out of installer mode.
5. Close the controller door.
NOTE: at this time, installation should be completed.