User Manual

BaracodaPencil 2 User Guide

Bluetooth connectivity interface:

Single Blinks (e.g. *pause*pause*…) The scanner is ready to be connected

Double fast Blinks (e.g. **pause**pause**…) The scanner is connected

Barcode decoder interface:

One Single long Blink (green colour) The scanner has just read and decoded a barcode

LED Blinking colour:

The led colour is Green The Scanner is set in Real Time mode or in master

Mode

The Led Colour is Orange The Scanner is set in batch mode

Special cases:

LED blinks orange The scanner was set in the mode “Real Time, no

bufferisation” and is not connected. In this particular

situation the trigger will not activate the beam:

impossible to read barcodes in this mode.

Double fast Blinks Red Battery level is low. Please recharge the battery

immediately.