User's Manual

XIRING – Ingenico Healthcare / eID – Baracoda orKan `rfid hf’ – User Guide v1.3
22/35
5) Beeps, Vibrator and LEDs
You can enable/disable beeps / Vibrator / LED blinks using either the Baracoda Desktop
Manager software or the Programming Guide.
6) Power Management
Several parameters can be tuned to optimize the battery autonomy (“Sniff period”,
“Shutdown timer”, etc…)
The orKan terminal Bluetooth power is set at 20dBm (Bluetooth Class 1) by default.
The Baracoda Desktop Manager software can be used to modify the parameters having an
impact on the battery autonomy.
7) Low Battery
An alternation of red and green blinking on the two (2) LEDs indicates that the battery level is
low. Recharge the battery immediately. If you continue using the terminal, it will work until a
triple beep occurs: at that moment the terminal will shut down and you will be forced to
charge the terminal.