SECTION 10 28 13 ELECTRIC HAND DRYERS ** NOTE TO SPECIFIER ** Excel Dryer, Inc.; Electric Hand Dryers. This section is based on the products of Excel Dryer, Inc., which is located at: 357 Chestnut Street P.O. Box 365 East Longmeadow, MA 01028 Tel: (413) 525‐4531 Fax: (413) 525‐2853 Email: sales@exceldryer.com Web: www.exceldryer.com [click Here] for additional information.
testing to prove its products’ performance, and manufactures the only hand dryers that are Made In USA Certified® Excel Dryer participates in compliance testing under the UL Environment Product Category Rule (PCR) for Hand Dryers. This internationally recognized set of rules, requirements and guidelines was created through industry consensus and reports on a product's impact on the environment, establishing an objective standard by which to evaluate drying times vs. energy usage.
1.2 RELATED SECTIONS ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required. 1.3 A. Section 061000 ‐ Rough Carpentry: Blocking in stud partitions for mounting hand dryers. B. Section 260519 – Low Voltage electrical Power Conductors and Cables: Electrical supply, conduit, wiring, boxes, and wiring devices for hand dryers.
D. E. LEED Submittals: Provide documentation of how the requirements of LEED v4.0 Credits will be met: 1. Product Data: For products contributing to increased energy performance, provide manufacturer documentation of use and non‐use energy consumption. 2. Product Data: For products having recycled content, provide manufacturer documentation including percentage(s) by weight of postconsumer and preconsumer recycled content. 3.
B. Source Limitations: Obtain all electric hand dryers from a single source and from single manufacturer. ** NOTE TO SPECIFIER ** CE or CSA certifications for export applications may apply for non‐ US applications. C. Equipment certified by Underwriters Laboratory, Inc., with UL and ULC labels. ** NOTE TO SPECIFIER ** Barrier free requirements will depend on type of project and local jurisdiction.
A. UL Product Category Rule (PCR) Testing: 1. 2. 3. B. XLERATOR Hand Dryer a. Dry Time: Not greater than eight seconds. b. Energy per Use: Not greater than 3.7 W‐h (13.32 J). XLERATOReco Hand Dryer a. Dry Time: Not greater than 10 seconds b. Energy Per Use: Not greater than 1.7 Wh (6.12 J) ThinAir Hand Dryer a. Dry Time: Not greater than 14 seconds b. Energy Per Use: Not greater than 3.7 Wh (13.
2. 3. 4. 5. a. Cover: Bulk Molding Composite (BMC). b. Finish: White color. Model XL‐W: a. Cover: Zinc die cast. b. Finish: White painted. Model XL‐GR: a. Cover: Zinc die cast. b. Finish: Textured graphite painted. Model XL‐C: a. Cover: Zinc die cast. b. Finish: Chrome plated. Model XL‐SB: a. Cover: Stainless steel. b. Finish: Brushed Number 4 finish.
9. a. Cover: Zinc die cast. b. Finish: Custom special color painted. Options: **NOTE TO SPECIFIER ** Select the following Optional HEPA Filtration System if required. Delete if not required. a. HEPA Filtration System: Filters 99.97 percent of bacteria at 0.3 microns from the air stream. **NOTE TO SPECIFIER ** Use Optional Noise Reduction Nozzle if required. Delete if not required. b. Noise Reduction Nozzle: Reduces air deflection noise level by 9 dB and increases the dry time by 2‐3 seconds.
14. Pre‐Filter: Extends the lifespan and improves reliability. Reduces lint, dust and other airborne debris from entering the internal motor chamber. Filter sensor is activated if filter becomes clogged. 15. Nominal Size: 11‐3/4 inches (298 mm) wide by 12‐11/16 inches (322 mm) high by 6‐11/16 inches (170 mm) deep. 16. Weight: ** NOTE TO SPECIFIER ** Delete all but one of the following covers. 17. a. 17 pounds (7.7 kg) die cast cover. b. 16 pounds (7.2 kg) stainless cover. c. 15 pounds (6.
23. a. Men's Toilets: 45 inches (1143 mm). b. Women's Toilets: 43 inches (1092 mm). c. Teenagers' Toilets: 41 inches (1041 mm). d. Young Children's Toilets: 35 inches (889 mm). e. Toilets for Persons with Physical Disabilities: 37 inches (940 mm). f. Mount dryers at heights indicated on Drawings. Optional Accessories: ** NOTE TO SPECIFIER ** Select Wall Guard type if required. Delete if not required. Standard height and ADA height kits are available. a.
2. 3. 4. 5. a. Cover: Bulk Molding Composite (BMC). b. Finish: White color. Model XL‐W‐ECO: a. Cover: Zinc die cast. b. Finish: White painted. Model XL‐GR‐ECO: a. Cover: Zinc die cast. b. Finish: Textured graphite painted. Model XL‐C‐ECO: a. Cover: Zinc die cast. b. Finish: Chrome plated. Model XL‐SB‐ECO: a. Cover: Stainless steel. b. Finish: Brushed Number 4 finish.
**NOTE TO SPECIFIER ** Select the following Optional HEPA Filtration System if required. Delete if not required. a. HEPA Filtration System: Filters 99.97 percent of bacteria at 0.3 microns from the air stream. **NOTE TO SPECIFIER ** Use Optional Noise Reduction Nozzle if required. Delete if not required. b. Noise Reduction Nozzle: Reduces air deflection noise level by 9 dB and increases the dry time by 2‐3 seconds. ** NOTE TO SPECIFIER ** Select mounting type required and delete the one not required. 9.
** NOTE TO SPECIFIER ** Delete all but one of the following covers. 16. a. 17 pounds (7.7 kg) die cast cover. b. 16 pounds (7.2 kg) stainless cover. c. 15 pounds (6.8 kg) bulk molding composite. Power Source: ** NOTE TO SPECIFIER ** Delete all but one of the following power sources. a. 110 ‐ 120 Volts, 4.3 ‐ 4.5 Amps, 50/60 Hz, 460 ‐ 530 Watts. b. 208 ‐ 277 Volts, 2.0 ‐ 2.2 Amps, 50/60 Hz, 425 ‐ 500 Watts. c. 230 Volts, 2.2 Amps, 50 Hz, 500 Watts. 17.
a. Anti‐Microbial Wall Guards: Plastic Microban Anti‐microbial Wall Guards 31‐3/4 inches (806 mm) by 15‐3/4 inches (400 mm) by 1/16‐ inch (1.5 mm) deep with 1/2‐inch (13 mm) radius corners with double sided construction grade 3M adhesive tape on the mounting side. ** NOTE TO SPECIFIER ** Select Anti‐Microbial Wall Guards color required. Delete the one not required. b. 1) White plastic. (2 per set) 2) Black plastic. (2 per set) Brushed Stainless Steel Wall Guards.
adjustable sound and speed control mechanism, adjustable heat control with High, Medium, Low and Off settings. Sensor equipped with externally visible Red LED light that flashes error codes to assist in troubleshooting. Control assembly sealed for protection against moisture, lint, dust and vandalism. 5. Air Intake: Inlet openings on bottom of cover. 6. Air Outlet: Air baffle; designed to keep foreign objects out of dryer. 7.
14. a. Men's Toilets: 45 inches (1143 mm). b. Women's Toilets: 43 inches (1092 mm). c. Teenagers' Toilets: 41 inches (1041 mm). d. Young Children's Toilets: 35 inches (889 mm). e. Toilets for Persons with Physical Disabilities: 37 inches (940 mm). f. Mount dryers at heights indicated on Drawings. Optional Accessories: ** NOTE TO SPECIFIER ** Select Wall Guard type if required. Delete if not required. Standard height and ADA height kits are available. a.
3. 4. 5. 6. 7. b. Finish: Chrome plated. c. Time Cycle: 30 Seconds. d. Mounting: Surface Mounted. Model H76‐W: Hair Dryer a. Cover: Zinc die cast. b. Finish: White color. c. Time Cycle: 3 Minutes. d. Mounting: Surface Mounted. Model H76‐C: Hair Dryer a. Cover: Zinc die cast. b. Finish: Chrome plated. c. Time Cycle: 3 Minutes. d. Mounting: Surface Mounted. Model R76‐W: Hand Dryer a. Cover: Zinc die cast. b. Finish: White color. c. Time Cycle: 30 Seconds. d.
d. 8. Mounting: Semi‐Recessed. Model RH76‐C: Hair Dryer a. Cover: Zinc die cast. b. Finish: Chrome plated. c. Time Cycle: 3 Minutes. d. Mounting: Semi‐Recessed. ** NOTE TO SPECIFIER ** Select the dryer type required from the following two options and delete one if not required. 9. Electronic Controls, Hand Dryers: Push button; electronic timer with adjustable time cycle; set to 30 seconds. 10.
b. 17. Weight: 20 pounds (9.0 kg). Power Source: ** NOTE TO SPECIFIER ** Delete all but one of the following six power sources. 50 Hz models available for export. 18. a. 110‐120 Volts, 15 Amps, 60 Hz., 1650‐1800 Watts b. 110‐120 Volts, 20 Amps, 60 Hz., 2200‐2400 Watts c. 208‐230 Volts, 10 Amps, 60 Hz., 2080‐2300 Watts d. 277 Volts, 8 Amps, 60 Hz., 2216 Watts e. 220 Volts, 10 Amps, 50 Hz., 2200 Watts f. 240 Volts, 10 Amps, 50 Hz.
23. a. Men's Toilets: 45 inches (1143 mm). b. Women's Toilets: 43 inches (1092 mm). c. Teenagers' Toilets: 41 inches (1041 mm). d. Young Children's Toilets: 35 inches (889 mm). e. Toilets for Persons with Physical Disabilities: 37 inches (940 mm). f. Mount dryers at heights indicated on Drawings. Mount hair dryers at the following heights above floor surface: ** NOTE TO SPECIFIER ** The following are typical mounting heights.
4. a. Cover: Zinc die cast. b. Finish: White color. c. Mounting: Semi‐Recessed. Model R76‐IC: a. Cover: Zinc die cast. b. Finish: Chrome plated. c. Mounting: Semi‐Recessed. 5. Electronic Controls: Activated by infrared optical sensor. Operates while hands are moving under blower. Shut‐off in 90 seconds if hands not removed. 6. Nozzle: Fixed 7. Air Intake: Inlet openings on bottom of cover. ** NOTE TO SPECIFIER ** Delete one of the following two mountings. 8. 9. 10.
11. c. 208‐230 Volts, 10 Amps, 60 Hz., 2080‐2300 Watts d. 277 Volts, 8 Amps, 60 Hz., 2216 Watts e. 220 Volts, 10 Amps, 50 Hz., 2200 Watts f. 240 Volts, 10 Amps, 50 Hz., 2400 Watts Motor: ** NOTE TO SPECIFIER ** Select one of the following two motors, according to power source selected and delete the one not required. a. 60 Hz, capacitor‐initiated; brushless, for longer life and quiet operation; 1/10 HP, 3,450 RPM; self‐lubricating bearings; self‐resetting thermal switch. b.
f. F. Mount dryers at heights indicated on Drawings. Conventional, Push Button or Automatic Lexan Hand Dryer: heated air, electric hand dryer; Lexan series; surface mounted; lightweight; entire dryer internally grounded. Made in the USA Certified. Warranty 5 year limited. ** NOTE TO SPECIFIER ** Select the Model required from the following paragraphs and delete those not required. 1. 2. 3. Model HO‐BL: a. Cover: Molded Lexan. b. Finish: White color. c. Time Cycle: 30 Seconds. d.
7. Nominal Size: 12 inches (305 mm) wide by 9‐3/4 inches (248 mm) high by 8 inches (203 mm) deep. Weight: 13 pounds (5.9 kg). 8. Power Source: ** NOTE TO SPECIFIER ** Delete all but one of the following six power sources. 50 Hz models available for export. 9. a. 110‐120 Volts, 15 Amps, 60 Hz., 1650 – 1800 Watts b. 110‐120 Volts, 20 Amps, 60 Hz., 2200 – 2400 Watts c. 208‐230 Volts, 10 Amps, 60 Hz., 2080‐2300 Watts d. 277 Volts, 8 Amps, 60 Hz., 2216 Watts e. 220 Volts, 10 Amps, 50 Hz.
** NOTE TO SPECIFIER ** The following are typical mounting heights. Indicate mounting heights on Drawings or designate as part of Specification; do not indicate mounting heights in both Specifications and Drawings a. Men's Toilets: 45 inches (1143 mm). b. Women's Toilets: 43 inches (1092 mm). c. Teenagers' Toilets: 41 inches (1041 mm). d. Young Children's Toilets: 35 inches (889 mm). e. Toilets for Persons with Physical Disabilities: 37 inches (940 mm). f.
A. Install in accordance with manufacturer's instructions. ** NOTE TO SPECIFIER ** Accessible layout for persons with physical disabilities must ensure a minimum clear floor space of 30 inches by 48 inches (762 mm by 1219 mm) in front of or parallel to hand dryers.