cover(A)2007.6.
R-672(A) 2007.6.15 10:17 AM 페이지 2 ENGLISH SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5.
R-672(A) 2007.6.15 10:17 AM 페이지 3 Introduction This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
R-672(A) 2007.6.
R-672(A) 2007.6.15 10:17 AM 페이지 5 System Connections ENGLISH • Do not plug the AC input cord into the wall AC outlet until all connections are completed. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver. 1. CONNECTING ANTENNAS • Change the position of the FM indoor antenna until you get the best reception of your favorite FM stations.
R-672(A) 2007.6.15 10:17 AM 페이지 6 ENGLISH 2. CONNECTING VIDEO COMPONENTS • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2 can also be connected to an additional video component such as a cable TV tuner, an LD player or satellite system.
R-672(A) 2007.6.15 10:17 AM 페이지 7 • There are three types of video jacks(COMPONENT, S-VIDEO, (composite) VIDEO) for connecting video components. Connect them to the corresponding video jacks according to their capability. • For your reference, the excellence in picture quality is as follows : "COMPONENT” > "S-VIDEO” > "(composite) VIDEO”. • When making COMPONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB" (or "B-Y", "PB") and "PR/CR" to "CR" (or "R-Y", "PR" ).
R-672(A) 2007.6.15 10:17 AM 페이지 8 ENGLISH 4. CONNECTING EXTERNAL INS • Use these jacks to connect the corresponding outputs of a DVD player or external decoder, etc. that has 6, 7 or 8 channel analog audio outputs • In case of 6 or 7 channel outputs, do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input of this unit. (For details, refer to the operating instructions of the component to be connected.) 5.
R-672(A) 2007.6.15 10:17 AM 페이지 9 6. CONNECTING SUBWOOFER PRE OUT • To emphasize the deep bass sounds, connect a powered subwoofer. ENGLISH Note : • When the power amplifier is assigned to "SB+W" (Surround Back+Subwoofer), no signals are output from the SUBWOOFER PRE OUT jack. (For details, refer to "When selecting the AMP ASSIGN" on page 37.) 7. CONNECTING XM (only for North America) • Connect the XM terminal to the XM Mini-Tuner system (sold separately).
R-672(A) 2007.6.15 10:17 AM 페이지 10 9. SWITCHED AC OUTLETS ENGLISH • These outlets are switched on(power-on mode) and off(standby mode) according to power control as follows(Maximum total capacity is 120 W (1 A)). Standby mode - Switched AC outlet off Power-on mode - Switched AC outlet on 10. AC INPUT CORD • Plug this cord into a wall AC outlet. Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc.
R-672(A) 2007.6.15 10:17 AM 페이지 11 ENGLISH Front Panel Controls 1. POWER switch 2. POWER ON/STANDBY button/indicator 3. VIDEO INPUT SELECTOR button 4. AUDIO INPUT SELECTOR button 5. EXTERNAL IN button 6. BAND button 7. MASTER VOLUME CONTROL knob 8. HEADPHONE jack 9. SPEAKER button/indicator 10. SURROUND MODE button 11. STEREO button 12. DISPLAY button 13. DIGITAL / ANALOG MODE button 14. SETUP button 15. CHANNEL LEVEL button 16. CONTROL UP/DOWN(▲/▼) buttons 17. MEMORY/ENTER button 18.
R-672(A) 2007.6.15 10:17 AM 페이지 12 ENGLISH SETUP MIC JACK • To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When selecting the AUTO SETUP" on page 41.) Notes: • Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than the one supplied with this receiver. • After you have completed the auto setup procedure, disconnect the microphone.
R-672(A) 2007.6.
R-672(A) 2007.6.15 10:17 AM 페이지 14 ENGLISH REMOTE CONTROL OPERATION RANGE • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. LOADING BATTERIES 1. Remove the cover. 2. Load two batteries("AAA" size, 1.5V) matching the polarity. • Remove the batteries when they are not used for a long time. • Do not use the rechargeable batteries(Ni-Cd type).
R-672(A) 2007.6.15 10:17 AM 페이지 15 Operations ENGLISH Notes: • Before operating this receiver, first set this unit as desired for optimum performance, doing the system setup procedures. (For details, refer to “System Setup” on page 34) LISTENING TO A PROGRAM SOURCE 3. Select the desired input source. Before operation • Enter the standby mode. • The POWER ON/STANDBY button lights up .
R-672(A) 2007.6.15 10:17 AM 페이지 16 7. To mute the sound. When CD, AUX, VIDEO 1~2 is selected as an input source ENGLISH 4. Select the digital or analog input connected as desired. • "MUTE" will flicker. • To resume the previous sound level, press it again. • Each time this button is pressed, the corresponding input is selected as follows: → A(nalog) → o(ptical) 1 → o(ptical) 2 c(oaxial) 2 ← c(oaxial) 1 ← 8. To listen with the headphones.
R-672(A) 2007.6.15 10:17 AM 페이지 17 Adjusting the tone (bass and treble) ENGLISH 9. Enter the tone mode. • The tone mode is displayed for several seconds. Note : When the digital signals from DTS, Dolby Digital program sources are input or the EXTERNAL IN is selected can listen to a program source without the tone effect. When the “TONE” is set to ON to adjust the tone (bass and treble). 10. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired tone mode. 11.
R-672(A) 2007.6.15 10:17 AM 페이지 18 SURROUND SOUND ENGLISH • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. Surround modes • DTS Neo : 6 Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.
R-672(A) 2007.6.15 10:17 AM 페이지 19 Dolby Pro Logic Dolby Pro Logic is a specially encoded two channel surround format which consists of four channels (front left, center, front right and surround). Sources bearing the " " provide the theater-like surround sound. The surround channel is monaural, but is played through both surround speakers. Dolby Headphone The Dolby Headphone function simulates 5.1 channel surround sound, which allows you to enjoy 5.
R-672(A) 2007.6.15 10:17 AM 페이지 20 ENGLISH ENJOYING SURROUND SOUND Notes: • Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance. (For details, refer to "SETTING THE SPEAKER SETUP" on page 41.) • When the EXTERNAL IN is selected as an input source, the surround modes cannot be selected. Depending on how to select a surround mode, select the auto surround mode or the manual surround mode.
R-672(A) 2007.6.15 10:17 AM 페이지 21 Continued • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2CH downmix mode, select the surround mode with using the MULTI CONTROL knob on the front panel or the SURROUND MODE UP/DOWN ( >/< ) buttons on the remote control.
R-672(A) 2007.6.15 10:17 AM 페이지 22 Continued ENGLISH 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter. • Depending on the surround mode, each time these buttons are pressed, the parameter mode changes as follows: * When listening in Dolby Pro Logic II/Dolby Pro Logic IIx Music mode, you can adjust the various surround parameters for optimum surround effect. “PANO” “C.
R-672(A) 2007.6.15 10:17 AM 페이지 23 Continued When selecting the “WIDE” (Dolby Virtual Speaker Wide) mode 2 SP : When using 2 front speakers only. ENGLISH 3 SP : When using 2 front and center speakers 4 SP : When using 2 front and 2 surround speakers. 5 SP : When using 2 front, center and 2 surround speakers. Note: When the speakers are set to “N” (None), the corresponding speaker layouts cannot be selected.
R-672(A) 2007.6.15 10:17 AM 페이지 24 ENGLISH Adjusting the current channel level • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("CAL"), not into preset memory("REF 1", "REF 2"). 1. Press the CHANNEL LEVEL button. 3. Adjust the level of the selected channel as desired.
R-672(A) 2007.6.15 10:17 AM 페이지 25 Memorizing the adjusted channel levels 1. After performing the steps 1~4 in "Adjusting the current 2. Select the desired one of REF 1 and REF 2. channel level" procedure on page 24, press the (MEMORY/) ENTER button. • If the preset memory disappears, perform the above step 1 again. • The "1" of "REF 1" indication flickers for several seconds. 3. Confirm your selection. • The adjusted channel levels have now been memorized into the selected memory.
R-672(A) 2007.6.15 10:17 AM 페이지 26 LISTENING TO RADIO BROADCASTS ENGLISH Auto tuning 1. Select the desired band. 2. Press the TUNING UP(+)/DOWN(-) buttons or the SELECT UP(▶) / DOWN(◀) buttons for more than 0.5 second. • The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and "TUNED". • If the station found is not the desired one, simply repeat this operation. • Weak stations are skipped during auto tuning.
R-672(A) 2007.6.15 10:17 AM 페이지 27 Manual presetting • You can store up to 30 preferred stations in the memory. 3. Select the desired preset number (1~30) and press the (MEMORY/)ENTER button. 2. Press the (MEMORY/) ENTER button. • When using the NUMERIC buttons on the remote control. Examples) For “3” : • "MEM" is flickering for several seconds. For “15” : For “30” : • The station has now been stored in the memory.
R-672(A) 2007.6.15 10:17 AM 페이지 28 XM Satellite Radio (only for North America) ENGLISH • This receiver is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM Mini-Tuner system (sold separately) and subscribing the XM service. About XM Satellite Radio for U.S. & Canadian products XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk and entertainment. XM is broadcast in superior digital audio from coast to coast.
R-672(A) 2007.6.15 10:17 AM 페이지 29 Channel search ENGLISH • In the XM mode, press the TUNING UP (+)/DOWN (-) buttons or the SELECT UP(▶) / DOWN(◀) buttons repeatedly to select the desired channel. Direct search • Direct search is useful when you already know the channel number. 2. While displaying "XM - - - ", select the desired channel number with pressing the NUMERIC buttons. 1. In the XM mode, select the direct search mode.
R-672(A) 2007.6.15 10:17 AM 페이지 30 Continued ENGLISH 3. Select the desired channel in the selected category. Presetting channels Preset search • You can store up to 30 preferred channels in the memory. • In the XM mode, select the desired preset channel. 1. Select the desired channel with preforming channel search, direct search or category search. 2. To memorize the channels, perform the steps 2 to 4 • When using the NUMERIC buttons on the remote control.
R-672(A) 2007.6.15 10:17 AM 페이지 31 • The analog signals from the EXTERNAL INs as well as the digital signals from the coaxial or optical digital input can be heard but cannot be recorded. • When recording the analog signals from CD, AUX, VIDEO 1~2, be sure to make the analog audio connection between components. • The volume and tone (bass, treble) settings have no effect on the recording signals. Recording with TAPE 1. Select the desired input as a recording source except 2. Start recording on the TAPE.
R-672(A) 2007.6.15 10:17 AM 페이지 32 Continued 4. Start play on the VIDEO 2 and the CD respectively. ENGLISH 3. Start recording on the VIDEO 1. • The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers. Note: Be sure to observe the order of the above steps 1 and 2.
R-672(A) 2007.6.15 10:17 AM 페이지 33 OTHER FUNCTIONS • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as follows: → 10 → 20 → 30 → --- → 90 → OFF Unit : minutes • While operating the sleep timer, " " lights up. • When the sleep time is selected, the fluorescent display is dimly lit.
R-672(A) 2007.6.15 10:17 AM 페이지 34 ENGLISH System Setup • The setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. The setup menu consists of 5 main menus ; system , input, speaker setup, CH level and parameter. These menus are then divided up into various sub-menus.
R-672(A) 2007.6.
R-672(A) 2007.6.15 10:17 AM 페이지 36 ENGLISH Continued • When “RETURN” is selected on a sub-menu, it will returns to the previous menu. Note: During setup menu operation, only the (POWER ON/)STANDBY button and the buttons required for system setup will function.
R-672(A) 2007.6.15 10:17 AM 페이지 37 ENGLISH SETTING THE SYSTEM • AMP (AMP ASSIGN) : To assign the power amplifier to the surround back left and right channels or the surround back and the subwoofer channels. • SW (SUBWOOFER) : To select the desired subwoofer mode. • TONE : To adjust the tone (bass and treble) as desired. • C-EQ (CINEMA EQ) : To select the desired cinema EQ mode. • RETURN : To return to the previous menu. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to 2.
R-672(A) 2007.6.15 10:17 AM 페이지 38 Continued ENGLISH When selecting the TONE Note : When the digital signals from DTS, Dolby Digital program sources are input or the EXTERNAL IN is selected as an input source, you cannot adjust the tone and can listen to a program source without the tone effect. OFF : To listen to a program source without the tone effect. ("DIRECT" indicator lights up.) ON : To adjust the tone for your taste. ("DIRECT" indicator goes off.
R-672(A) 2007.6.15 10:17 AM 페이지 39 ENGLISH SETTING THE INPUT • D.IN (DIGITAL IN) : To assign the connected DIGITAL INs to the desired input. • V.MODE (VIDEO MODE) : To output the video input signal to be output from the MONITOR OUTs other than the HDMI MONITOR OUT. • AUTO (AUTO SURROUND) : To select the auto surround mode or the manual surround mode. • REMST (REMASTER) : To process the input digital signal and to convert its digital sampling frequency to 88.
R-672(A) 2007.6.15 10:17 AM 페이지 40 Continued When selecting the VIDEO MODE ENGLISH • You can select the video input signal to be output from the MONITOR OUTs other than the HDMI MONITOR OUT. “AT” (AUTO) : When there are multiple video input signals, the video input signals are detected and the video input signal to be output from the MONITOR OUTs is selected automatically in the following order : component video, Svideo, composite video.
R-672(A) 2007.6.15 10:17 AM 페이지 41 • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.
R-672(A) 2007.6.15 10:17 AM 페이지 42 Continued ENGLISH About the first listening position The first listening position is the point where a listener sits most often or the listening position when only one person is listening. Measurements start from this point.
R-672(A) 2007.6.15 10:17 AM 페이지 43 Continued • For optimum effectiveness, place the microphone at the second main position within the listening area surrounded by the speakers. 5. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "CONTINUE", then press the ENTER button. When performing the auto setup When the auto setup has been completed • Loud test tones are output again successively and then if a series of auto setup procedure has been completed, "COMPLETE" will be displayed.
R-672(A) 2007.6.15 10:17 AM 페이지 44 Continued ENGLISH When selecting the SPEAKER CONFIGURATION 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “CONFIG”, then press the ENTER button. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker. 3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected speaker as desired. • Depending on your speaker type, you can select one of these following speaker types.
R-672(A) 2007.6.15 10:17 AM 페이지 45 Continued About the speaker size • Select “L” (Large) or “S” (Small) not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency (bass sound below frequency set on the SPEAKER CROSSOVER menu) signals. • If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.
R-672(A) 2007.6.15 10:17 AM 페이지 46 Continued ENGLISH When selecting the SPEAKER CROSSOVER • When speakers are set to "S" (Small), be sure to set their crossover frequency correctly according to their frequency characteristics. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “X-OVER”, then press the ENTER button. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.
R-672(A) 2007.6.15 10:17 AM 페이지 47 Continued • The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured by the auto setup, the room EQ automatically adjusts the frequency response of speakers. • If you use different brands or sizes of speakers for some channels or have a room with unique acoustic characteristics, such as walls, furniture, and the dimensions or the shape of the room, we recommend using the room EQ.
R-672(A) 2007.6.15 10:17 AM 페이지 48 ENGLISH SETTING THE CH LEVEL Note : • Depending on the speaker settings("N" (None or No)), some channels cannot be selected. Adjusting the current channel level • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("CAL"), not into preset memory("REF 1", "REF 2"). • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes.
R-672(A) 2007.6.15 10:17 AM 페이지 49 Continued • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. 1. After performing the steps 1~3 in "Adjusting the current channel level" procedure on page 48, press the ENTER button. • The “1” of "REF 1" indication flickers. 2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired preset memory, then press the ENTER button.
R-672(A) 2007.6.15 10:17 AM 페이지 50 ENGLISH SETTING THE SOUND PARAMETER • NIGHT (NIGHT MODE) : To adjust the dynamic range compression that makes faint sound easier to hear at low volume levels. • PLII MSC (DOLBY PLII MUSIC) : To adjust the various surround parameters for optimum surround effect. • DOLBY HP (DOLBY HEADPHONE) : To select the desired listening mode for each Dolby Headphone mode.
R-672(A) 2007.6.15 10:17 AM 페이지 51 Continued • You can adjust the various surround parameters for optimum surround effect. Note: The parameter settings are valid only when listening in either Dolby Pro Logic II Music mode or the Dolby Pro Logic IIx Music mode. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “PLII MSC”, then press the ENTER button. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter.
R-672(A) 2007.6.15 10:17 AM 페이지 52 Continued ENGLISH When selecting the DOLBY HEADPHONE • You can select the desired listening mode for each Dolby Headphone mode. Note: The listening mode setting is valid only when playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source in a Dolby Headphone mode. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “DOLBY HP”, then press the ENTER button. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired Dolby Headphone mode.
R-672(A) 2007.6.15 10:17 AM 페이지 53 Continued • You can select the speaker layout to be used actually for each Dolby Virtual Speaker mode. Note : The speaker layout settings are valid only when listening in a Dolby Virtual Speaker mode. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “DOLBY VS”, then press the ENTER button. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired Dolby Virtual Speaker mode.
R-672(A) 2007.6.15 10:17 AM 페이지 54 Troubleshooting Guide ENGLISH If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty. PROBLEM POSSIBLE CAUSE REMEDY No power • The AC input cord is disconnected.
R-672(A) 2007.6.15 10:17 AM 페이지 55 AMPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 0.2 %, 40 Hz~20 kHz | 2×100 W • Total harmonic distortion, 6 Ω, 95 W, 1 kHz | 0.05 % • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 95 W | 0.1 % • Input sensitivity/impedance Line (CD, TAPE, VIDEO) | 300 mV/47kΩ • Signal to noise ratio, IHF "A" weighted Line (CD, TAPE, VIDEO) | 100 dB • Frequency response Line (CD, TAPE, VIDEO), 10 Hz~100 kHz | +0, -3 dB • Output level TAPE OUT, 2.
cover(A)2007.6.
