Operating Instruction Audio/Video Receiver R-672

ENGLISH
52
Continued
When selecting the DOLBY HEADPHONE
• You can select the desired listening mode for each Dolby Headphone mode.
󰥒Note: The listening mode setting is valid only when playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source
in a Dolby Headphone mode.
󰥳 MOVIE : This provides the surround effect suitable for movie
sources.
󰥸
MSC 1 (MUSIC 1) : This provides the surround effect suitable for
music sources.
󰥸
󰥳
MSC 2 (MUSIC 2) : This provides less surround effect compared
to MUSIC 1 mode.
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “DOLBY HP”, then press the ENTER button.
2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired Dolby Headphone mode.
3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired listening mode.
• Each time the CURSOR UP(▲) / DOWN(▼) buttons are pressed,
“DH 1” (Dolby Headphone 1), “DH 2” or “DH 3” is selected.
4. Repeat the above steps 2 and 3 to select the desired listening modes for other Dolby Headphone modes.
R-672(A) 2007.6.15 10:17 AM 페이지 52