SA10085 User Guide Satellite Radio Receiver Important: This manual contains important safety and operating information. Please read and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your Roady2 and/or to your vehicle.
FCC ID: RS2SA10085 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT: The FCC and FAA have not certified the Delphi XM Roady2 Satellite Radio Receiver for use in any aircraft (neither portable nor permanent installation).
Welcome Thank you for purchasing a Delphi XM® Roady2™ Satellite Radio Receiver. Your Roady2 gives you access to over 120 XM Satellite Radio channels of music, news, and information from coast-to-coast.* Your Roady2 must be used with the enclosed connecting devices (or other approved accessories) to ensure maximum performance and safety. *XM subscription required for reception. Not available in Alaska or Hawaii. Caution: Do not modify or alter wires or connections in any way.
About Roady Roady2 is the latest in the acclaimed line of portable devices from Delphi and XM Satellite Radio and represents the best in audio technology. The smallest and lightest satellite radio receiver currently available, Roady2 is always ready to go with you.
Contents Section 1 Getting Started: Activating Roady2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Section 2 Roady2 Receiver Roady2 Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Roady2 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Section 3 Basic Operations Turning Roady2 On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 1 Getting Started: Activating Roady2 To quickly begin enjoying Delphi XM Satellite Radio, follow these simple steps: 1. Set up your Roady2 using the installation instructions in Section 5 of this guide (see page 17) or with the help of a professional installer. 2. Press the power button to turn your Roady2 on and verify that it is playing Channel 1, the XM Preview Channel. 3. Select Channel 0. The receiver’s eight-character XM Satellite Radio ID number will appear on the display.
Section 2 Roady2 Receiver Roady2 Display Screen While tuned to an XM channel, the Roady2 default display contains information about that channel and the Roady2 settings. See figure 1. Signal-strength indicator (zero to three bars) Display mode indicator Category search indicator Direct/preset mode (Direct, Preset A, Preset B, or Preset C) Channel name and number Artist name Figure 1. Roady2 display.
Section 2 The Roady2 unit has seven function buttons, a Tuning Wheel, and 10 number keys. Turns the Roady2 on or off. display memory menu The display button toggles between four display options: 1. Channel name, channel number, artist name 2. Channel name, channel number, song title 3. Artist name, song title 4. Artist name, stock ticker Press Memory to save artist name and song title information.
Turning Roady2 On and Off Press on the Roady2. When first turned on, the receiver will automatically tune in to the last channel listened to and recall the previous settings. Basic Channel Selection Select a channel by number 1. Make sure that Roady2 is in Direct Entry mode. “Direct” should appear in the preset/direct upper right corner of the display. If A, B, or C appears, press until the display says “Direct.” 2. Enter channel number using the number keys, i.e., 5 then 0 for Channel 50.
Section 3 3. Press and hold the number key corresponding to the preset you would like to set. The receiver will beep to indicate that the preset is registered. 4. When you first get Roady2, all presets go to Channel 1. Preview and select channels using the Tuning Wheel You can use your Roady2 to preview the XM channel lineup, see what is currently playing, and then decide if you want to leave your current channel. 1.
Display Option 2 Display Option 3 Display Option 4 Figure 3. Roady2 screen displays. Changing the Display display Pressing lets you change what is shown on your two-line Roady2 display during normal listening from among four options: • Display mode 1 (factory default): Shows the channel name and channel number on the first line and the artist name on the second line. • Display mode 2: Shows the channel name and number on the first line and shows the song title on the second line.
Section 4 Menu menu Press to enter the menu section of Roady2. Here, you can change each of the following options using the Tuning Wheel . Select the highlighted item by menu in. While in the menu section, acts as a “back” pressing the Tuning Wheel button, allowing you to back out of existing sections.
Section 4 each available frequency until you have found an optimal frequency. In the rare circumstance that you cannot find an acceptable open frequency, change to a hard-wired FM modulator configuration using the separately available FM Modulator Direct Wiring Adaptor described in the Available Accessories section on page 29. Note that you may need to repeat this procedure if you travel to areas with different FM stations in order to ensure the most static-free performance.
Section 4 Antenna Aiming When using the optional home kit, you can optimize the position of your home antenna using this screen. For optimal performance, your home antenna should be positioned to maximize the satellite signal received by your Roady2. TuneSelect™ Using this function, you can program your Roady2 to alert you with a tone when a favorite song is playing on a channel other than the one you are listening to. in 1. While the song is playing, press and hold the Tuning Wheel for 2 seconds.
This feature lets you track your favorite stocks and indices by “Scroll” (default) or by “Pages”*, selectable in the “Display Mode” option of the “Stock Ticker” menu. You can enter up to 20 favorite stock symbols and indices, tracking the price and daily movement**. You can track any stock symbols and most indices listed on the NYSE, NASDAQ, or AMEX. This feature is first set up by selecting “Stock Ticker” in the menu and then selecting “Add Stocks.
Section 4 Auto-On Once you have installed your Roady2 and the power has been turned on using the power button , you will discover your Roady2 has been factoryset to be turned off and back on again using the ignition key in your vehicle. To change this factory-set condition and always power your Roady2 on and off with the power button , select the “Auto-On” feature in the menu and then select “Off.” Auto-Off You can set your radio to automatically shut off 60, 120, or 180 minutes after it is turned on.
Roady2 Kit Set-up Your Roady2 Kit contains the following components: Car mount Cell phone mount adaptor XM antenna 12V power adaptor Vent mount Cassette audio adaptor Your kit also includes: • Car mount bracket • Extra adhesive pad • Surface preparation cleaning kit • Alcohol prep pad • Cable wrap • Adhesive-backed Velcro® pads Figure 4. Roady2 Kit components. Hooking up your Roady2 Receiver (Optional) Figure 5. Connect accessories to your Roady2 as shown.
Section 5 Audio Quality Good Direct Connect: Cassette Adaptor: FM Modulator: Wireless FM Modulator: Better Best Roady2 offers the listener an unprecedented variety of options for connecting to your vehicle’s radio. All options provide excellent sound quality and stereo separation.
Section 5 the XM audio signal wirelessly to the vehicle’s FM radio. This FM modulator is automatically turned on whenever the cassette adaptor (or other audio jack) is unplugged from the side of the Roady2. One of 12 different frequencies can be selected, as described on page 12. In order to ensure optimum performance, the signal is broadcast to your car’s FM radio from both inside the Roady2, and from the included XM antenna. Roady2 Installation Your Roady2 can be installed as follows: 1.
Section 5 (a) Flat mount: Use the included Velcro® pads and attach them to both the back of Roady2 and the identified flat surface in your vehicle. (b) Vent mount: Your Roady2 kit includes an optional vent mount that can be used in place of the more permanent Velcro® or swivel mounts so you can easily move your Roady2 and mount from car to car. Assemble the mount by inserting the two clips into the main piece, clipping them onto the vent, and then positioning the pivoting kickstand Figure 6.
3. Clip the Roady2 onto the swivel or vent To vehicle mount (figure 7). dashboard 4. Reassemble the system as in step 1, inserting cassette audio adaptor into the vehicle’s cassette deck and the 12V power adaptor into the cigarette lighter. 5. Attach the antenna as explained on page 22 and route the antenna cable as described on page 24. Figure 7. Attach car mount to back of Section 5 adhere to the vehicle’s surface.
Section 5 XM Antenna Set-up Antenna Installation • Best reception is achieved with the antenna mounted on the metal surface of the vehicle roof in the center of an area with at least 12" x 12" of surface area and a minimum of 6" from a window or sunroof. Figure 8 shows three typical mounting locations. • For optimum wireless FM reception, the XM antenna should be placed in a location close to the vehicle’s FM radio antenna.
Front Mounting Option Figure 9. Route XM Antenna through windshield as shown. Section 5 Cable Routing • Once you have mounted the antenna in the correct location, plan how to route the cable from this location to the receiver, avoiding blocked passages and any obstructions that could kink, crimp, twist, or chafe the cable. Figure 9 shows typical routing configurations. If the cable will come into contact with a rough metal opening, use a rubber grommet to prevent damage.
Section 5 • For antenna mounting locations at the rear of the roof, the antenna cable can be routed into the vehicle through the trunk, as shown in figure 10. Always route the cable under the weather seal near the lowest part of the trunk to help reduce possible water leaks. • Use pre-existing wiring channels created by the vehicle manufacturer whenever possible. Rear Mounting Option Figure 10. Route XM Antenna wiring as shown.
Taking Care of Your Roady2 (Failure to follow these instructions may result in personal injury or damage to your Roady2 or to your vehicle.) Important: • Use only a soft, dry cloth to clean the outside of your Roady2 and any peripherals. • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. • Do not allow liquids to spill on the unit. • Do not use sprays near your Roady2.
Section 6 Troubleshooting Your Roady2 is designed and built to provide you with trouble-free performance without the need for service. If it does not appear to be functioning correctly, please follow these troubleshooting steps: 1. Make sure all connectors are properly attached. 2. Make sure the cigarette lighter/auxiliary power socket is clean and free of corrosion. 3. Make sure the adaptor is firmly seated in the cigarette lighter/ auxiliary power socket. 4.
You should: NO SIGNAL Cause: The XM signal is being blocked. The message should disappear as soon as you move out of an obstructed area such as an indoor garage. If the problem persists, make sure your antenna is mounted outside and on top of your car with a clear view of the sky. ANTENNA Cause: The antenna jack that plugs into your Roady2 has probably come loose. Make sure antenna is correctly attached to the receiver and that antenna cable is undamaged and free from kinks.
Section 6 If this happens: You should: You do not receive all XM channels you have subscribed to. Cause: Your Roady2 is not activated. Contact XM as described in “Getting Started: Activating Roady2” on page 6. The audio sounds distorted Reduce audio-output level as described under “Menu Commands and Settings: Audio Level” on page 13. The audio level is too low Increase audio-output level as described in “Menu Commands and Settings: Audio Level” on page 13.
For additional information in solving problems with your Roady2, contact Delphi at 1.877.GO DELPHI (1.877.463.3574) Monday—Friday. • Customer Service: 8:00 am—4:30 pm Eastern Standard Time • Technical Support: 8:00 am—8:00 pm Eastern Standard Time Customer Service and Technical Support is also available at www.delphi.com. Technical Information Dimensions Roady2 . . . . . . . . . . . . . . . . . . . . . . 3.9 in. W x 2.4 in. H x 0.7 in. D (100 mm x 60 mm x 18 mm) Weight Roady2 . . . . . . . . . . . . .
Section 7 XM Satellite Radio Limited Consumer Warranty Delphi Product and Service Solutions (“Delphi”) warrants all XM Satellite Radio Products sold by Delphi (“Products”) to be free of defects in material and workmanship, subject to the following conditions. The duration of Delphi’s warranty with respect to Delphi XM Satellite Radio Products is limited to one (1) year from the date of sale to the original consumer purchaser. No other express warranties are made with respect to any Product.
To obtain warranty service during the first thirty (30) days after the date of purchase, you must return the defective Product with the original receipt to the original place of purchase. To obtain warranty service during the remainder of the warranty period, you must contact Delphi by phone at 1.877.GO DELPHI (1.877.463.3574).
Delphi Corporation 1441 West Long Lake Road Troy, Michigan 48098-5090 U.S.A. Customer Service: [1] 877.GO DELPHI www.delphi.com The Roady2 name, XM name, and related logos are trademarks of XM Satellite Radio Inc. Printed on Recycled Paper ©2004 Delphi Corporation. All rights reserved.