{ Before You Start } Precautions Information to User Alteration er modifications Carr oul paper: authorization id date the user's right to operate the equipment. About this unit A WARNING | candling ihe rads assoc ord on this product or with a on prop State tor tal ens hands after handling. [A canon | damage, smoke, and ove! neat could result from contact with liquids, Andy as a reference for operating procedures and precautions.
( Before You Start After-sales service for About the XM Logo Pioneer products Please contact th i = (taxman. Mm = The below for KM stale] contact, the uni tes that iris ar You can revive casts by connecting installation manual, ip your ar king adv ngs are traders 5; e ses the Introducing XM Satellite With your Radio There's a work beyond AM and FM. Xi Product registration Visit us at the following €: ay HTTP www.pioneerelectronics.com Cr I keen the to help you information In the event of an or theft.
(Before You Start | How to subscribe Listeners can subscribe by visiting XM on the web by calling X's Lister RADIO | 3 967-2346]. Customers should their Radio |D ready: for details, refer to "Display D code (Radio 1D)" ive a limited rim channels without acl id Note For information on tha oo ner fe 0 iS val wT radio. verge ares where Xi © visit Technology.
{ Before You Start TN No Ned Head unit group 2 Function compatibility chart “G EX-PO2OXM” with th fol units, refer fo t oid with the head un son the head Head unit group 4 ET SOURCE Head unit group 3 sen using “G EX-FO20KM” with the following head units.
{ Before You Start ) Resetting the microprocessor The microprocessor must be reset under the following conditions: + Prior to using this unit for the first time. If the unit fails to operate properly When strange or incorrect messages appear on the display « When © Press RESET on the unit with a pen tip ar other pointed instrument.
( What's What Head unit {e.g. D EH-PG700MP) ) CLOCK button and hold to change channel select mode. @ DISPLAY button Press io select different displays (3 FUNCTION button Press ta sel unction @& buttons Press ta sel channel, recall a channel and select a category. Also used for con troll § ons. & BAND button Press to select among three Xi bands and | the control moth & 1-6 buttons Press for pres tuning.
{XM tuner Power supply for this unit When th ly is OFF, this un wreck other than XM tuner will not turn this product off) This unit's power supply car be turned OFF it the ignition switch is turned OFF If for any LESSON YOu Wart 10 ew @ power of ine unit OFF switch the ve! 5 ignition off {turn the ACH your vehicle to OFF). @ En Selecting the XM source 1 Press SOURCE to turn the head unit oh, 2 Press SOURCE to select “XM” source.
{XM tuner ~~ Listening to XM H NUMBER is selected, and CAT played when CATEGORY © © XM channel number indicator Shows which XM channel number the tuner is ned fo. @ XM band indicator the XM d which has bean ih sel @ XM preset number indicator Shows what XM preset has been si ted & XM channel name Shows the channel name of broadcast chairing, En 1 Press SOURCE to select a XM source.
{ XM tuner ) Storing and recalling channels ed. ® When you find a channel that you want to store in memory, press one of the preset tuning buttons 1-6 and hold until the preset number stops flashing, The number you h dash in the preset number i ain lit ii same preset uns ed from nary. Notes » Upton chair lens.
[XM tuner go Introduction of advanced Switching the channel tuner operation select mode When selecting a between detecting a of umber of by Initially, channel selected, 1 Press FUNCTION to select MODE. Press FUNCTION until MODE appears in the D_ Function display status 2 Press select the desired Se mE channel select mode. ® Press FUNCTION to display the fun ie ro [imperially to site between son name.
(XM tuner py Selecting the channel in the channel category channel © category, 1 Select the channel category select mode. {Refer to “Switching the channel select mode” above.) 2 Press BAND to return to the previous display. 3 Press select the desired channel category. Inge you sel i unit ne even if you pr Sly Ghana the 4 Press select the desired channel in the selected channel category.
{ Additional Information ) Radio ID IT) Display I) Display art to verily each 1 I og used) hen on the fol SE — £n
{Additional Information |) ( Messages When problems oc below to identify ur with the XM tuner a message problem, then take the fe Trig Xb antenna is 001 ape; guested Cf ars on the display. Refer to the table corrective action. ion the Xd oly Check what attached sas: erring Ultrashort outpouring in the antenna or the surrounding Sake sure dak there is nothing sensual with the nea cable.
{ Additional Information S 7 { Specifications General Power sous: Negative ype DEE 2.5345.40 Mbz Bn on Antenna ner Sour EY x 14x40 mm (Bx 10 CBS} Lem (6 tiny 3.06 ky 0.
Register your product at ad See “Product registration” page PIONEER CORPORATION 4-1, LEGUME 1-SOME, MEGACHURCH, TOKYO 153-8854, JAPAN PIONEER ELECTRONICS (USA) ING. 0. Box 1640, Long Beach. California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Fiberglass 1, B-9120 Melee, Belgium TEL: {0) PIONEER ELECTRONICS ACCENTURE PTE. LTD. 253 Alexandria Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY.
Connecting the Un Note: This unit is for vehicles with a 12-volt battery and negative grounding. Be tors installing it in a rec atonal vehicle, truck, or bus, check the battery voltage. To avoid shorts in the electrical system, be sure fo disconnect the © battery cable before beginning installation. Refer to the owner's manual for details on connecting the power amp and other units, then take connections correctly. Secure the wiring with cable clamps or adhesive tape.
Connection Diagram. 3, PT-BUS Output 3, Antenna Input PUBS cable \ This product Inmate Unit Blue Violet N \ Power Supply Sr {I6 Sin) | Black (ground) Te vehicle (metal; body. G(R $n) Fuse Holder (2A) S \ Yellow To terminal swags supplied with power regardless of ignition switch position. 1-BUS cable \
( Note: + Before making 2 final installation of the unit, rem cattily consent the wiring to confirm that the connections ars correct and the system works properly. Use only the pars included with the unit 10 ensure proper installation. The use of authorized turps can cause malfunctions.
installing the Unit...
(eri) Installing the Antenna Unit Installation using the magnet of antenna in {15.5 cm) TN gin t155 0m) Note: «If the antenna is mounted on the ao, it can be installed in positions other than those in the diagram. To ensure the best reception. mount more than six fuses away from the edge of ihe roof. + Tf mounted in au exterior location an the vehicle other than the vehicle's roof. reception way be poor. + Da not install inside the vehicle, as reception will be extremely poor.
Route the antenna cable When routing the lead inside the trunk Waterproof pad Make sure the waterproof pad contacts he top of the rubber packing.
Kronecker PIONEER ELECTRONICS (USA) ING. PIONEER ELECTRONICS OF CANADA, INC, LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) lnc. (FUSS, and Pioneer Electronics Of Canada, Inc. {POCK, warrant that products distributed by PUSS in the U.S.A.
