User's Manual

EXI HALO User Manual Halo User Manual R4

EXI Wireless Systems Inc. Page 27 of 33 May, 1999
5.4. Disabling a P-Tag
To disable a P-Tag, you must first navigate to the Tags screen in Supervisor level.
To temporarily disable a P-Tag in the system:
1. Select the tag to be disabled by navigating the mouse pointer anywhere on the line corre-
sponding to the tag on the screen.
2. Select
5.5. Unassigning a P-Tag
As a supervisor, you may unassign a P-Tag. To unassign a P-Tag, you must first navigate to the Tags
screen in Supervisor level.
To unassign a tag:
1. Select the tag to be unassigned by navigating the mouse pointer anywhere on the line corre-
sponding to the tag on the screen.
2. Select
The tag will automatically be unassigned.
Note: You may only disable tags that are currently assigned to an infant.
Note: The tag disabling allows for removal of the tag from the infant without an alarm.
The infant is not actually discharged from the system. Once you have disabled the
tag you are responsible to enable it again or remove the infant from the system in
user mode or supervisor mode. This event is captured in the Activity log.
Note: Once a tag is unassigned, the patient name will be removed from the system.