User's Manual

EXI HALO User Manual Halo User Manual R4

EXI Wireless Systems Inc. Page 30 of 33 May, 1999
TAB
TAB
TAB
6.1. Adding a new user to the system
To add a new user, you must first navigate to the Users screen in Supervisor level.
1. Select
2. The system will then ask you to enter in a username, password and real name.
3. Enter in the username you wish to assign to the user, followed by the
4. Press the key on the keyboard
5. Enter in the password assigned to the new user
6. Press the key on the keyboard
7. Enter in the common name for the user (usually their full name)
8. Press the key on the keyboard
9. If the user is to have Supervisor level access select Supervisor
10. Select OK
Note: It is suggested that supervisor access be carefully controlled. Any supervisor may
assign, delete or edit another supervisors access level.