User's Manual

EXI HALO User Manual Halo User Manual R4

EXI Wireless Systems Inc. Page 31 of 33 May, 1999
6.2. Deleting a user from the system
To delete a user from the system, you must first navigate to the user area in the Supervisor level.
1. Select the user you wish to delete by clicking anywhere on the line corresponding to the user
on the screen
2. Select
6.3. Disabling a system user
The user disable function allows a user to temporarily disable the user access of a particular user. This
may be useful when a nurse is on leave of absence but is expected to return. Instead of deleting and re-
entering all of the nurses’ information, a Supervisor may leave the user in the system but disable ac-
cess.
To disable a user, you must first navigate to the user area in the Supervisor level.
1. Select the user you wish to disable by clicking anywhere on the line corresponding to the user
on the screen.
2. Select
6.4. Editing a system user access
A Supervisor may change a user’s password or name associated with the system username. This may be
useful for surname changes etc. To edit a user file, you must first navigate to the Supervisor level and
user area.
1. Select the user you wish to edit
2. Select
Caution!: Ensure you have selected the correct user prior to selecting delete. This step
cannot be undone.
The user status field should now read “disabled” for that user.
Note: You may change a users password and “real” name. The system username is fixed. If you
wish to change the username, you will have to delete and then add the user into the sys-
tem again.