User's Manual
Installation Guide: Proximity Tag Reader Installation Guide: Proximity Tag Reader
Functional Description
The Proximity Tag Reader (PTR) is a medium range RFID tag reader. The PTR can be
used to:
Determine if a Tag is in a specific place; or,
Record the passage of Tags through a doorway or other restricted point.
Figure 1: Proximity Tag Reader
The PTR is mounted to a flat surface using a backplate.
The PTR is housed in an attractive case that is without exterior adjustments. To make
wiring connections and adjustments, you must dismount and open the case.
The only required wire connections are for power. An optional wire connection is
available as a dry contact input to trigger the Low Frequency (LF) field in Standby
Mode.
Preferred Practices
When installing the PTR:
Record the PTR serial number and location.
To save time, temporarily mount the PTR in its final location and then set LF field
strength, address, and operating mode. After these operations are complete,
permanently mount the PTR.
Top View
Exterior LEDs
Mounting EarMounting Ear
Bottom View
Mounting Ear
Mounting Ear
Wire Access
Page 3 981-000300-000 R1.00 (Draft)
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
Table 5: (Continued) Address Switch
Address
ABCDEFGH
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
Table 5: (Continued) Address Switch
Address
ABCDEFGH