Installation Manual

EXI HALO Installation Manual Rev 2.0

EXI Wireless Systems Inc. Page 18 June, 1999
Figure 14 - Halo Wiring Diagram
RECEIVE
ANTENNA
RBC
FCC ID# HE7MAX
TRANSMIT OUTPUT
SEA #1
SEA #2
Made in Canada . . with care
Controller
by
Power
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+24V DC Input System Ground +12V Out 200 ma System Ground Weigand 0/Data Weigand 1/Gnd System Ground MagOut 24V 200 ma Door Switch In System Ground Unlock In Override In Strobe In N.O COM N.C. N.O COM N.C
Relay #1 Relay #2
Alarm In
OFF ON
RS+
RS-
GND
RS+
RS-
GND
R2 RECEIVER
DATA
COMM.
Made in Canada . . with care
12/24 VDC GROUND DATA 0 DATA 1 N/O 1 COM 1 N/C 1 N/O 2 COM 2 N/C 2
POWER
RELAY
1 2 3 4 5 6 7 8 9 10
DKX
Keypad
Optional
PS-24
Power
Supply
EXI ELECTRONIC SYSTEMS Winnipeg, Manitoba [phone]
Made in Canada
PRODUCT MODEL NO. SERIAL NO>
ROAM II/TAGRRR SEA-M 1118
Brn
RIM
Grn
Blk
Blu
Whi
Red
Yel
Gry
1 2 3
4 5 6
7 8 9
*
0
#
Grn
Blk
Blu
RIM
R2 TAP
PC Terminator
Box
PC to
Network Cable
RS-485Weigand
Brn
Pin# Wire
Color
Function
3 Brown +12/24 V
4 Green System GND
5 Black Weigand 0/Data
6 Blue Weigand 1/Data
10 White Alarm In
12 Red Unlock In
13 Yellow Override In
14 Gray Strobe In
Factory
Wired
Factory
Wired
RS-485 Shielded Cable, 24 AWG
Maximum Capacitance 15 pf per foot
Example: Electro Cables FT-4 Part #5302452
Daisy Chain (Series) Configuration as much as
possible.
RS-485 Connector (To Halo
NetworkController Output)
DB9
R2
Receiver
Pin
Function Wire
Color
DB 25
1 +12/24V Brown 14
2 System GND Green 7
3 Data 0 Black 20
4 Data 1 Blue 22
TAP
Optional
PS-24
Power
Supply
Pin # Function
9 or 12 RS +
7 GND
22 or 25 RS -
RIM Pin-Out
Com
NOTE: Check all network
wiring before connecting
to the PC.
Enlarged
View
RS +
(Yellow)
Gnd
(Green)
RS -
(White)
Caution: Ensure appropriate
stranded cables are used for
Elevator Shafts due to the
continuous flexing they will
have to endure!
Factory
Supplied
Factory
Supplied
RS-485Weigand
Factory
Supplied
Optional RS-485 Repeater
(Required for total cable length
of greater than 4,000 ft, and
highly recommended for isolation
of Halo Elevator Controller)
RS-485
Repeater
Halo Receiver Connector Pin-Out
Halo Controller Connector Pin-Out
Optional, to
Enhamce
Coverage
Elevator System or
other devices