Operations Manual

EXI HALO Installation & Operation Manual 981-000003-000
EXI Wireless Systems 39 March 2000
Revision 2.0
Floor Plan area.
Controllers shown as half-filled square icons
Receivers shown as half-filled circular icons
Elevators shown as square icon with “X’
Blue: Normal, Yellow: Pre-Alarm condition,
Flashing Red: Full Alarm condition
Arrow points at device(s) corresponding to selected alarm in
Active Alarm field
Floor Plan Buttons
Green: Normal
Blue: Indicates that the cursor is positioned over button
Yellow: Indicated Pre-alarm condition on floor
Red: Alarm condition on this floor
Active alarms field
Red: Normal alarm color
Blue: Selected alarm
Patient Admit and Discharge buttons
Alarm Silence and Accept field.
Normally grayed characters.
“Silence” button is active upon selecting an alarm from the
Active Alarm field.
“Accept Alarm” button is active after valid Username and
Password are entered.
8.1. Computer Display Conventions
The computer displays various types of information, which is color coded to differentiate between the Dealer,
Supervisor and User modes. In addition, the “Icons” that display the locations of the various system
components such as the Controllers and the Receivers, and the on-screen “buttons” may also change color to
indicate their status.
Figure 31 - HALO Console User Screen