Manualshelf

User Manual

ManualsBrandsxmartO ManualsElectronicsWireless Security Camera System 8CH 1080p NVR 4pcs 1.3MP Wireless Security IP Cameras, 1TB Hard Drive (Built-in Router, Plug N Play, Mobile View, Night Vision, supports 4 more Add-on Cameras)
12345678910
www.xmarto.com
9
Rear View
(Images used are for reference only. Your product may vary slightly.)
1. VGA Video Output - Connect the VGA cable from the VGA output port on the NVR to the VGA
input port on your TV/Monitor. (VGA cable not included)
2. HDMI Video Output - Connect the HDMI cable from the HDMI output port on the NVR to the
HDMI input port on your TV/Monitor. (HDMI cable not included)
3. RJ-45 (Ethernet) Port - The RJ-45 port will be used to connect the Wireless NVR to your
modem/router for remote viewing. Please note that your Wireless NVR comes with built-in Wi-Fi for
the cameras to transmit to the NVR. However, you will need to manually connect the NVR to your
modem/router to remotely view on a smart device or PC/Mac®. (If you need to add camera to the
system, or repair camera to NVR, you can also use this Ethernet port to pair camera to NVR.)
4. USB Ports - USB ports allow for the connection of a USB mouse and/or a USB flash drive. You
will connect the included USB mouse to assist you in navigating the NVR’s menu interface. You will
connect a USB flash drive to download video files from the NVR for long term storage or sharing.
5. Power Input - Power input is used to connect the included 12V DC power supply.
6. NVR Antenna Mount - For installation of two included NVR antennas.
NOTE: The maximum number of cameras you can connect to your wireless NVR will be
determined by the number of channels.