Manualshelf

User Manual

ManualsBrandsxmartO ManualsElectronicsWireless Security Camera System 8CH 1080p NVR 4pcs 1.3MP Wireless Security IP Cameras, 1TB Hard Drive (Built-in Router, Plug N Play, Mobile View, Night Vision, supports 4 more Add-on Cameras)
11121314151617181920
www.xmarto.com
14
4.3 NVR Installation
4.3.1 Connect your wireless NVR
1. Connect the two included antennas to your wireless NVR. This will ensure you achieve the
maximum wireless range for transmission from your wireless cameras.
2. Connect NVR to a standalone PC monitor or TV using VGA or HDMI cable (VGA & HDMI cable
not included).
3. Plug one end of the included Ethernet cable into the WAN port on the back of the Wireless NVR.
4. Plug the other end of the Ethernet cable into a port on the back of your router.
5. Connect the Wireless NVR to power using included 12V 3A DC power adapter.
You should see each camera appear on your TV/Monitor. You may now proceed to install your
Wireless NVR cameras in the desired location.
If you do not see cameras appear on your TV/monitor, you must have a NVR resolution compatibility
issue. Please contact xmartO support at support@xmarto.com for help.
Install Antennas for NVR
Connect NVR to monitor/TV